Datasheet Texas Instruments TPS61087DRCR — 数据表

制造商	Texas Instruments
系列	TPS61087
零件号	TPS61087DRCR

具有强制PWM模式的18.5V，3.2A，650kHz / 1.2MHz升压DC-DC转换器10-VSON -40至85

数据表

下载

PDF, 1.4 Mb, 修订版: D, 档案已发布: Dec 17, 2014

从文件中提取

价格

状态

Lifecycle Status	Active (Recommended for new designs)
Manufacture's Sample Availability	Yes

打包

Pin	10
Package Type	DRC
Industry STD Term	VSON
JEDEC Code	S-PDSO-N
Package QTY	3000
Carrier	LARGE T&R
Device Marking	PMOQ
Width (mm)	3
Length (mm)	3
Thickness (mm)	.9
Pitch (mm)	.5
Max Height (mm)	1
Mechanical Data	下载

参数化

Duty Cycle(Max)	90 %
Iq(Typ)	0.075 mA
Operating Temperature Range	-40 to 85 C
Package Group	VSON
Rating	Catalog
Regulated Outputs	1
Special Features	Enable,Frequency Synchronization,Power Good
Switch Current Limit(Min)	3.2 A
Switch Current Limit(Typ)	4 A
Switching Frequency(Max)	1500 kHz
Switching Frequency(Min)	900 kHz
Type	Converter
Vin(Max)	6 V
Vin(Min)	2.5 V
Vout(Max)	18.5 V
Vout(Min)	3 V

生态计划

RoHS

Compliant

设计套件和评估模块

Evaluation Modules & Boards: TPS61087EVM-317
TPS61087 Evaluation Module
Lifecycle Status: Active (Recommended for new designs)
- 下载

应用须知

下载
Discrete Charge Pump Design (Rev. A)
PDF, 190 Kb, 修订版: A, 档案已发布: Jul 16, 2010
Many applications require an auxiliary power supply in addition to a primary power supply. For example, TFT-LCD applications can require +20 V to +30 V and +10 V to +20 V. As a result of cost, board space, or inventory, a separate converter may not be appropriate for some applications. This document demonstrates a simple charge pump circuit that provides the auxiliary positive voltage using the TP
下载
Low Cost 1W Isolated Power Supply Solution with TPS61085
PDF, 175 Kb, 档案已发布: Jun 26, 2012
下载
AN-2020 Thermal Design By Insight, Not Hindsight (Rev. C)
PDF, 568 Kb, 修订版: C, 档案已发布: Apr 23, 2013
This application report provides an in-depth discussion of thermal design.
下载
Minimizing Ringing at the Switch Node of a Boost Converter
PDF, 201 Kb, 档案已发布: Sep 15, 2006
The application report explains how to use proper board layout and/or a snubber to reduce high-frequency ringing at the switch node of a boost converter.
下载
Design considerations for a resistive feedback divider in a DC/DC converter
PDF, 393 Kb, 档案已发布: Apr 26, 2012
下载
Basic Calculation of a Boost Converter's Power Stage (Rev. C)
PDF, 186 Kb, 修订版: C, 档案已发布: Jan 8, 2014
This application note gives the equations to calculate the power stage of a boost converter built with an IC with integrated switch and operating in continuous conduction mode. It is not intended to give details on the functionality of a boost converter (see Reference 1) or how to compensate a converter. See the references at the end of this document if more detail is needed.
下载
PowerPAD Thermally Enhanced Package (Rev. H)
PDF, 983 Kb, 修订版: H, 档案已发布: Jul 6, 2018
下载
Understanding the Absolute Maximum Ratings of the SW Node (Rev. A)
PDF, 755 Kb, 修订版: A, 档案已发布: Jan 13, 2012
下载
Extending the Soft Start Time Without a Soft Start Pin (Rev. B)
PDF, 387 Kb, 修订版: B, 档案已发布: Jun 15, 2017
下载
QFN and SON PCB Attachment (Rev. B)
PDF, 821 Kb, 修订版: B, 档案已发布: Aug 24, 2018
下载
IQ: What it is what it isn’t and how to use it
PDF, 198 Kb, 档案已发布: Jun 17, 2011
下载
Performing Accurate PFM Mode Efficiency Measurements (Rev. A)
PDF, 418 Kb, 修订版: A, 档案已发布: Dec 11, 2018
When performing measurements on DC-DC converters using pulse frequency modulation(PFM)or any power save mode proper care must be taken to ensure that the measurements are accurate. An accurate PFM mode efficiency measurement is critical for systems which require high efficiency at low loads such as in smart home systems tablets wearables and metering.

模型线

系列: TPS61087 (6)

TPS61087DRCR TPS61087DRCRG4 TPS61087DRCT TPS61087DRCTG4 TPS61087DSCR TPS61087DSCT

制造商分类

Semiconductors > Power Management > Non-isolated DC/DC Switching Regulator > Step-Up (Boost) > Boost Converter (Integrated Switch)