Datasheet MTD20P06HDL (ON Semiconductor) - 8

MTD20P06HDL PACKAGE DIMENSIONS DPAK
CASE 369C−01 ISSUE O NOTES:
−T− SEATING PLANE
1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982.
B C
2. CONTROLLING DIMENSION: INCH.
INCHES MILLIMETERS V R E DIM MIN MAX MIN MAX A
0.235 0.245 5.97 6.22
B
0.250 0.265 6.35 6.73
4 C
0.086 0.094 2.19 2.38
Z D
0.027 0.035 0.69 0.88
A E
0.018 0.023 0.46 0.58
S F
0.037 0.045 0.94 1.14
1 2 3 G
0.180 BSC 4.58 BSC
U K H
0.034 0.040 0.87 1.01
J
0.018 0.023 0.46 0.58
K
0.102 0.114 2.60 2.89
F L
0.090 BSC 2.29 BSC
J R
0.180 0.215 4.57 5.45
L S
0.025 0.040 0.63 1.01
H U
0.020 −−− 0.51 −−−
V
0.035 0.050 0.89 1.27
D 2 PL Z
0.155 −−− 3.93 −−−
G
0.13 (0.005) M T STYLE 2: PIN 1. GATE 2. DRAIN 3. SOURCE 4. DRAIN
SOLDERING FOOTPRINT*
6.20 3.0 0.244 0.118 2.58 0.101 5.80 1.6 6.172 0.228 0.063 0.243 SCALE 3:1 ǒ mm Ǔ inches *For additional information on our Pb−Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D.
ON Semiconductor
and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT
:
N. American Technical Support
: 800−282−9855 Toll Free
ON Semiconductor Website
:
www.onsemi.com
Literature Distribution Center for ON Semiconductor USA/Canada P.O. Box 5163, Denver, Colorado 80217 USA
Europe, Middle East and Africa Technical Support: Order Literature
: http://www.onsemi.com/orderlit
Phone
: 303−675−2175 or 800−344−3860 Toll Free USA/Canada Phone: 421 33 790 2910
Fax
: 303−675−2176 or 800−344−3867

Toll Free USA/Canada
Japan Customer Focus Center
For additional information, please contact your local
Email
: orderlit@onsemi.com Phone: 81−3−5773−3850 Sales Representative
http://onsemi.com MTD20P06HDL/D 8