LTM4619
Dual, 26VIN, 4A DC/DC
µModule Regulator
Features Description Complete Standalone Power Supply
n Wide Input Voltage Range: 4.5V to 26.5V
(EXTVCC Available for VIN ≤ 5.5V)
n Dual 180° Out-of-Phase Outputs with 4A DC
Typical, 5A Peak Output Current for Each
n Dual Outputs with 0.8V to 5V Range
n Output Voltage Tracking
n ±1.5% Maximum Total DC Output Error
n Current Mode Control/Fast Transient Response
n Power Good
n Phase-Lockable Fixed Frequency 250kHz to 780kHz
n On Board Frequency Synchronizatio Parallel Current Sharing
n Selectable Burst Mode® Operatio Output Overvoltage Protectio 15mm × 15mm × 2.82mm LGA Package The LTM®4619 is a complete dual 4A or single 8A stepdown DC/DC µModule® (micromodule) regulator. Included
in the package are the switching controller, power FETs,
inductor, and all support components. Operating over
input voltage ranges of 4.5V to 26.5V, the LTM4619 supports two outputs with voltage ranges of 0.8V to 5V, each
set by a single external resistor. Its high efficiency design
delivers 4A continuous current (5A peak) for each output. n High switching frequency and a current mode architecture
enable a very fast transient response to line and load
changes without sacrificing stability. The two outputs …