DATASHEET Single 16/Differential 8-Channel CMOS Analog
Multiplexers with Active Overvoltage Protection
HI-546/883, HI-547/883 Features The HI-546/883 and HI-547/883 are analog multiplexers with
active overvoltage protection and guaranteed rON matching.
Analog input levels may greatly exceed either power supply
without damaging the device or disturbing the signal path of
other channels. Active protection circuitry assures that signal
fidelity is maintained even under fault conditions that would
destroy other multiplexers. This circuit is processed in accordance to MIL-STD-883 and
is fully conformant under the provisions of Paragraph 1.2.1. Analog inputs can withstand constant 70VP-P levels with В±15V
supplies. Digital inputs will also sustain continuous faults up to
4V greater than either supply. In addition, signal sources are
protected from short circuiting should multiplexer supply loss
occur. Each input presents 1kО© of resistance under this
condition. These features make the HI-546/883 and
HI-547/883 ideal for use in systems where the analog inputs
originate from external equipment or separately powered
circuitry. Both devices are fabricated with 44V dielectrically
isolated CMOS technology. The HI-546/883 is a single
16-channel, and the HI-547/883 is an 8-channel differential
version. If input overvoltage protection is not needed, the
HI-506/883 and HI-507/883 multiplexers are recommended.
For further information see application note AN520. Analog signal range В±15V No channel interaction during overvoltage Guaranteed rON matching 44V maximum power supply Break-before-make switching Access time (max) 1.0Вµs Power dissipation (max) 45mW Applications Data acquisition systems Control systems Telemetry Ordering Information …