DPDT CMOS Analog Switch
HI-5046A/883 Features This CMOS analog switch offers low-resistance switching
performance for analog voltages up to the supply rails and for
signal currents up to 70mA. “ON” resistance is low and stays
reasonably constant over the full range of operating signal
voltage and current. RON remains exceptionally constant for
input voltages between +5V and -5V and currents up to 50mA.
Switch impedance also changes very little over temperature,
particularly between 0°C and +75°C. RON is nominally 25Ω
for the HI-5046A/883. This Circuit is Processed in Accordance to MIL-STD-883 and
is Fully Conformant Under the Provisions of Paragraph 1.2.1. This device provides break-before-make switching and is TTL
and CMOS compatible for maximum application versatility.
Performance is further enhanced by Dielectric Isolation
processing which insures latch-free operation with very low
input and output leakage currents (0.8nA at +25В°C). The
HI-5046A/883 also features very low power operation (1.5mW
at +25В°C). The HI-5046A/883 is available in a 16 Ld CerDIP
package and is specified over the temperature range of -55В°C
to +125°C. Wide Analog Signal Range ±15V Low “On” Resistance 25Ω (Typ), 50Ω (Max) High Current Capability . 70mA (Max) Break-Before-Make Switching
-Turn-On Time . 370ns (Typ), 800ns (Max)
-Turn-Off Time . .280ns (Typ), 400ns (Max) No Latch Up Input MOS Gates are Protected from Electrostatic Discharge DTL, TTL, CMOS, PMOS Compatible Applications High Frequency Analog Sample and Hold Digital Filters Operational Amplifier Gain Switching Functional Diagram Pin Configuration LOGIC “1” INPUT HI1-5046/883
(16 LD CERDIP)
TOP VIEW VL LOGIC “0” INPUT S1 …