Datasheet Intersil EL7158IS-T13 — 数据表

DATASHEET
EL7158 FN7349
Rev 2.00
May 14, 2007 Ultra-High Current Pin Driver
The EL7158 high performance pin driver with three-state is
suited to many ATE and level-shifting applications. The 12A
peak drive capability makes this part an excellent choice
when driving high capacitance loads. Features The output pin OUT is connected to input pins VH or VL
respectively, depending on the status of the IN pin. When the
OE pin is active low, the output is placed in the three-state
mode. The isolation of the output FETs from the power
supplies enables VH and VL to be set independently,
enabling level-shifting to be implemented. Related to the
EL7155, the EL7158 adds a lower supply pin VS-and makes
VL an isolated and independent input. This feature adds
applications flexibility and improves switching response due
to the increased enhancement of the output FETs. 0.2ns rise and fall times mismatch This pin driver has improved performance over existing pin
drivers. It is specifically designed to operate at voltages
down to 0V across the switch elements while maintaining
good speed and ON-resistance characteristics.
Available in the 8 Ld SOIC package, the EL7158 is specified
for operation over the full -40В°C to +85В°C temperature range. Clocking speeds up to 40MHz 12ns tR/tF at 2000pF CLOAD 0.5ns tON-tOFF prop delay mismatch 3.5pF typical input capacitance 12A peak drive Low ON-resistance of 0.5пЃ— High capacitive drive capability Operates from 4.5V to 12V Pb-free plus anneal available (RoHS compliant) Applications ATE/burn-in testers Level shifting IGBT drivers CCD drivers Pinout
EL7158 …