Datasheet Texas Instruments LMR12010 — 数据表

制造商Texas Instruments
系列LMR12010
Datasheet Texas Instruments LMR12010

SOT-23中的SIMPLESWITCHERВ®3V至20V,1A降压DC / DC开关稳压器

数据表

LMR12010 SIMPLE SWITCHER ® 20Vin, 1A Step-Down Voltage Regulator in SOT-23 datasheet
PDF, 1.2 Mb, 修订版: A, 档案已发布: Sep 29, 2011
从文件中提取

价格

状态

LMR12010XMK/NOPBLMR12010XMKE/NOPBLMR12010XMKX/NOPBLMR12010YMK/NOPBLMR12010YMKE/NOPBLMR12010YMKX/NOPB
Lifecycle StatusActive (Recommended for new designs)Active (Recommended for new designs)Active (Recommended for new designs)Active (Recommended for new designs)Active (Recommended for new designs)Active (Recommended for new designs)
Manufacture's Sample AvailabilityNoYesNoYesNoYes

打包

LMR12010XMK/NOPBLMR12010XMKE/NOPBLMR12010XMKX/NOPBLMR12010YMK/NOPBLMR12010YMKE/NOPBLMR12010YMKX/NOPB
N123456
Pin666666
Package TypeDDCDDCDDCDDCDDCDDC
Industry STD TermSOT-23-THINSOT-23-THINSOT-23-THINSOT-23-THINSOT-23-THINSOT-23-THIN
JEDEC CodeR-PDSO-GR-PDSO-GR-PDSO-GR-PDSO-GR-PDSO-GR-PDSO-G
Package QTY1000250300010002503000
CarrierLARGE T&RSMALL T&RLARGE T&RLARGE T&RSMALL T&RLARGE T&R
Device MarkingSF7BSF7BSF7BSF8BSF8BSF8B
Width (mm)1.61.61.61.61.61.6
Length (mm)2.92.92.92.92.92.9
Thickness (mm).87.87.87.87.87.87
Pitch (mm).95.95.95.95.95.95
Max Height (mm)1.11.11.11.11.11.1
Mechanical Data下载下载下载下载下载下载

参数化

Parameters / ModelsLMR12010XMK/NOPB
LMR12010XMK/NOPB
LMR12010XMKE/NOPB
LMR12010XMKE/NOPB
LMR12010XMKX/NOPB
LMR12010XMKX/NOPB
LMR12010YMK/NOPB
LMR12010YMK/NOPB
LMR12010YMKE/NOPB
LMR12010YMKE/NOPB
LMR12010YMKX/NOPB
LMR12010YMKX/NOPB
Control ModeCurrent ModeCurrent ModeCurrent ModeCurrent ModeCurrent ModeCurrent Mode
Duty Cycle(Max), %929292929292
Iout(Max), A111111
Iq(Typ), mA1.51.51.51.51.51.5
Operating Temperature Range, C-40 to 125-40 to 125-40 to 125-40 to 125-40 to 125-40 to 125
Package GroupSOT-23-THINSOT-23-THINSOT-23-THINSOT-23-THINSOT-23-THINSOT-23-THIN
RatingCatalogCatalogCatalogCatalogCatalogCatalog
Regulated Outputs111111
Special FeaturesEnableEnableEnableEnableEnableEnable
Switching Frequency(Max), kHz300030003000300030003000
Switching Frequency(Min), kHz160016001600160016001600
TypeConverterConverterConverterConverterConverterConverter
Vin(Max), V202020202020
Vin(Min), V333333
Vout(Max), V171717171717
Vout(Min), V0.80.80.80.80.80.8

生态计划

LMR12010XMK/NOPBLMR12010XMKE/NOPBLMR12010XMKX/NOPBLMR12010YMK/NOPBLMR12010YMKE/NOPBLMR12010YMKX/NOPB
RoHSCompliantCompliantCompliantCompliantCompliantCompliant

应用须知

  • AN-643 EMI/RFI Board Design (Rev. B)
    PDF, 742 Kb, 修订版: B, 档案已发布: May 3, 2004
    Application Note 643 EMI/RFI Board Design
  • Input and Output Capacitor Selection
    PDF, 219 Kb, 档案已发布: Sep 19, 2005
  • AN-1197 Selecting Inductors for Buck Converters (Rev. B)
    PDF, 558 Kb, 修订版: B, 档案已发布: Apr 23, 2013
    This application report provides design information to help select an off-the-shelf inductor for anycontinuous-mode buck converter application.
  • AN-2155 Layout Tips for EMI Reduction in DC/ DC Converters (Rev. A)
    PDF, 3.6 Mb, 修订版: A, 档案已发布: Apr 23, 2013
    This application note will explore how the layout of your DC/DC power supply can significantly affect theamount of EMI that it produces. It will discuss several variations of a layout analyze the results andprovide answers to some common EMI questions such whether or not to use a shielded inductor.
  • AN-1566 Techniques for Thermal Analysis of Switching Power Supply Designs (Rev. A)
    PDF, 1.4 Mb, 修订版: A, 档案已发布: Apr 23, 2013
    This application note provides thermal power analysis techniques for analyzing the power IC.
  • AN-1889 How to Measure the Loop Transfer Function of Power Supplies (Rev. A)
    PDF, 2.7 Mb, 修订版: A, 档案已发布: Apr 23, 2013
    This application report shows how to measure the critical points of a bode plot with only an audiogenerator (or simple signal generator) and an oscilloscope. The method is explained in an easy to followstep-by-step manner so that a power supply designer can start performing these measurements in a shortamount of time.
  • Semiconductor and IC Package Thermal Metrics (Rev. C)
    PDF, 201 Kb, 修订版: C, 档案已发布: Apr 19, 2016
  • AN-1149 Layout Guidelines for Switching Power Supplies (Rev. C)
    PDF, 82 Kb, 修订版: C, 档案已发布: Apr 23, 2013
    When designing a high frequency switching regulated power supply layout is very important. Using agood layout can solve many problems associated with these types of supplies. The problems due to a badlayout are often seen at high current levels and are usually more obvious at large input to output voltagedifferentials. Some of the main problems are loss of regulation at high output current
  • AN-1229 SIMPLE SWITCHER PCB Layout Guidelines (Rev. C)
    PDF, 374 Kb, 修订版: C, 档案已发布: Apr 23, 2013
    This application report provides SIMPLE SWITCHER™ PCB layout guidelines.
  • AN-2162 Simple Success With Conducted EMI From DC-DC Converters (Rev. C)
    PDF, 2.5 Mb, 修订版: C, 档案已发布: Apr 24, 2013
    Electromagnetic Interference (EMI) is an unwanted effect between two electrical systems as a result ofeither electromagnetic radiation or electromagnetic conduction. EMI is the major adverse effect caused bythe application of switch-mode power supplies (SMPS). In switching power supplies EMI noise isunavoidable due to the switching actions of the semiconductor devices and resulting disconti
  • AN-1246 Stresses in Wide Input DC-DC Converters (Rev. C)
    PDF, 427 Kb, 修订版: C, 档案已发布: Apr 23, 2013
    This application note discusses stresses in wide input DC-DC converters.
  • AN-1520 A Guide to Board Layout for Best Thermal Resistance for Exposed Packages (Rev. B)
    PDF, 9.2 Mb, 修订版: B, 档案已发布: Apr 23, 2013
    This thermal application report provides guidelines for the optimal board layout to achieve the best thermalresistance for exposed packages. The thermal resistance between junction-to-ambient (ОёJA) is highlydependent on the PCB (Printed Circuit Board) design factors. This becomes more critical for packageshaving very low thermal resistance between junction-to-case such as exposed pad TSSOP

模型线

制造商分类

  • Semiconductors> Power Management> Non-isolated DC/DC Switching Regulator> Step-Down (Buck)> Buck Converter (Integrated Switch)