Datasheet Texas Instruments LM2840-Q1 — 数据表

制造商Texas Instruments
系列LM2840-Q1
Datasheet Texas Instruments LM2840-Q1

薄型SOT-23中的100 mA高达42V输入降压型DC / DC稳压器

数据表

LM284x and LM284x-Q1 100, 300, or 600-mA 42-V Input Step-Down DC-DC Regulator in Thin SOT datasheet
PDF, 1.1 Mb, 修订版: J, 档案已发布: Feb 21, 2017
从文件中提取

价格

状态

LM2840XQMK/NOPBLM2840YQMK/NOPBLM2840YQMKX/NOPB
Lifecycle StatusActive (Recommended for new designs)Active (Recommended for new designs)Active (Recommended for new designs)
Manufacture's Sample AvailabilityNoYesYes

打包

LM2840XQMK/NOPBLM2840YQMK/NOPBLM2840YQMKX/NOPB
N123
Pin666
Package TypeDDCDDCDDC
Industry STD TermSOT-23-THINSOT-23-THINSOT-23-THIN
JEDEC CodeR-PDSO-GR-PDSO-GR-PDSO-G
Package QTY100010003000
CarrierLARGE T&RLARGE T&RLARGE T&R
Device MarkingSE9BSF2BSF2B
Width (mm)1.61.61.6
Length (mm)2.92.92.9
Thickness (mm).87.87.87
Pitch (mm).95.95.95
Max Height (mm)1.11.11.1
Mechanical Data下载下载下载

参数化

Parameters / ModelsLM2840XQMK/NOPB
LM2840XQMK/NOPB
LM2840YQMK/NOPB
LM2840YQMK/NOPB
LM2840YQMKX/NOPB
LM2840YQMKX/NOPB
Control ModeCurrent ModeCurrent ModeCurrent Mode
Duty Cycle(Max), %949494
Iout(Max), A0.10.10.1
Iq(Typ), mA1.31.31.3
Operating Temperature Range, C-40 to 125-40 to 125-40 to 125
Package GroupSOT-23-THINSOT-23-THINSOT-23-THIN
RatingAutomotiveAutomotiveAutomotive
Regulated Outputs111
Special FeaturesEnableEnableEnable
Switching Frequency(Max), kHz150015001500
Switching Frequency(Min), kHz950950950
TypeConverterConverterConverter
Vin(Max), V424242
Vin(Min), V4.54.54.5
Vout(Max), V343434
Vout(Min), V0.7650.7650.765

生态计划

LM2840XQMK/NOPBLM2840YQMK/NOPBLM2840YQMKX/NOPB
RoHSCompliantCompliantCompliant

应用须知

  • AN-643 EMI/RFI Board Design (Rev. B)
    PDF, 742 Kb, 修订版: B, 档案已发布: May 3, 2004
    Application Note 643 EMI/RFI Board Design
  • Input and Output Capacitor Selection
    PDF, 219 Kb, 档案已发布: Sep 19, 2005
  • AN-1197 Selecting Inductors for Buck Converters (Rev. B)
    PDF, 558 Kb, 修订版: B, 档案已发布: Apr 23, 2013
    This application report provides design information to help select an off-the-shelf inductor for anycontinuous-mode buck converter application.
  • AN-2155 Layout Tips for EMI Reduction in DC/ DC Converters (Rev. A)
    PDF, 3.6 Mb, 修订版: A, 档案已发布: Apr 23, 2013
    This application note will explore how the layout of your DC/DC power supply can significantly affect theamount of EMI that it produces. It will discuss several variations of a layout analyze the results andprovide answers to some common EMI questions such whether or not to use a shielded inductor.
  • AN-1566 Techniques for Thermal Analysis of Switching Power Supply Designs (Rev. A)
    PDF, 1.4 Mb, 修订版: A, 档案已发布: Apr 23, 2013
    This application note provides thermal power analysis techniques for analyzing the power IC.
  • AN-1889 How to Measure the Loop Transfer Function of Power Supplies (Rev. A)
    PDF, 2.7 Mb, 修订版: A, 档案已发布: Apr 23, 2013
    This application report shows how to measure the critical points of a bode plot with only an audiogenerator (or simple signal generator) and an oscilloscope. The method is explained in an easy to followstep-by-step manner so that a power supply designer can start performing these measurements in a shortamount of time.
  • Semiconductor and IC Package Thermal Metrics (Rev. C)
    PDF, 201 Kb, 修订版: C, 档案已发布: Apr 19, 2016
  • Low EMI Layout Made SIMPLE With LM43600/1/2/3 and LM46000/1/2 (Rev. A)
    PDF, 512 Kb, 修订版: A, 档案已发布: Sep 12, 2014
    Printed Circuit Board (PCB) layout for Switched Mode Power Supplies (SMPS) is critical to achieve proper converter operation good thermal performance and excellent radiated EMI performance. Optimized board layout for low radiated EMI is made very simple by the package and pin arrangement of the SIMPLE SWITCHER Synchronous Buck Converter family LM4360x and LM4600x
  • AN-1149 Layout Guidelines for Switching Power Supplies (Rev. C)
    PDF, 82 Kb, 修订版: C, 档案已发布: Apr 23, 2013
    When designing a high frequency switching regulated power supply layout is very important. Using agood layout can solve many problems associated with these types of supplies. The problems due to a badlayout are often seen at high current levels and are usually more obvious at large input to output voltagedifferentials. Some of the main problems are loss of regulation at high output current
  • AN-1229 SIMPLE SWITCHER PCB Layout Guidelines (Rev. C)
    PDF, 374 Kb, 修订版: C, 档案已发布: Apr 23, 2013
    This application report provides SIMPLE SWITCHER™ PCB layout guidelines.
  • AN-2162 Simple Success With Conducted EMI From DC-DC Converters (Rev. C)
    PDF, 2.5 Mb, 修订版: C, 档案已发布: Apr 24, 2013
    Electromagnetic Interference (EMI) is an unwanted effect between two electrical systems as a result ofeither electromagnetic radiation or electromagnetic conduction. EMI is the major adverse effect caused bythe application of switch-mode power supplies (SMPS). In switching power supplies EMI noise isunavoidable due to the switching actions of the semiconductor devices and resulting disconti
  • AN-1246 Stresses in Wide Input DC-DC Converters (Rev. C)
    PDF, 427 Kb, 修订版: C, 档案已发布: Apr 23, 2013
    This application note discusses stresses in wide input DC-DC converters.
  • AN-1520 A Guide to Board Layout for Best Thermal Resistance for Exposed Packages (Rev. B)
    PDF, 9.2 Mb, 修订版: B, 档案已发布: Apr 23, 2013
    This thermal application report provides guidelines for the optimal board layout to achieve the best thermalresistance for exposed packages. The thermal resistance between junction-to-ambient (ОёJA) is highlydependent on the PCB (Printed Circuit Board) design factors. This becomes more critical for packageshaving very low thermal resistance between junction-to-case such as exposed pad TSSOP

模型线

制造商分类

  • Semiconductors> Power Management> Non-isolated DC/DC Switching Regulator> Step-Down (Buck)> Buck Converter (Integrated Switch)