Datasheet Texas Instruments TPS61040DBVR — 数据表

制造商Texas Instruments
系列TPS61040
零件号TPS61040DBVR
Datasheet Texas Instruments TPS61040DBVR

用于LCD和白光LED应用的SOT-23中的28V,400mA开关升压转换器5-SOT-23 -40至85

数据表

TPS6104x Low-Power DC-DC Boost Converter in SOT-23 and WSON Packages datasheet
PDF, 1.2 Mb, 修订版: I, 档案已发布: Dec 13, 2016
从文件中提取

价格

状态

Lifecycle StatusActive (Recommended for new designs)
Manufacture's Sample AvailabilityYes

打包

Pin5
Package TypeDBV
Industry STD TermSOT-23
JEDEC CodeR-PDSO-G
Package QTY3000
CarrierLARGE T&R
Device MarkingPHOI
Width (mm)1.6
Length (mm)2.9
Thickness (mm)1.2
Pitch (mm).95
Max Height (mm)1.45
Mechanical Data下载

参数化

Duty Cycle(Max)88 %
Iq(Typ)0.028 mA
Operating Temperature Range-40 to 85 C
Package GroupSOT-23
RatingCatalog
Special FeaturesEnable
Switch Current Limit(Min)0.325 A
Switch Current Limit(Typ)0.4 A
Switching Frequency(Max)1000 kHz
TypeConverter
Vin(Max)6 V
Vin(Min)1.8 V
Vout(Max)28 V
Vout(Min)1.8 V

生态计划

RoHSCompliant

设计套件和评估模块

  • Evaluation Modules & Boards: TPS61040EVM-001
    TPS61040 Boost Converter Evaluation Module for LCD Supply, 18V/20mA
    Lifecycle Status: Active (Recommended for new designs)
  • Evaluation Modules & Boards: TPS61040EVM-002
    TPS61040 Boost Converter Evaluation Module for White LED Supply
    Lifecycle Status: Active (Recommended for new designs)
  • Evaluation Modules & Boards: TPS61045EVM-231
    TPS61045 Evaluation Module
    Lifecycle Status: Active (Recommended for new designs)

应用须知

  • High Voltage Power Supply Using the Highly Integrated TPS61040
    PDF, 72 Kb, 档案已发布: Jul 17, 2006
    The TPS61040 is a highly integrated, low-power, boost converter capable of delivering output voltages up to 28 V. Additionally, using a coupled inductor enables the TPS61040 to be used in applications where higher voltages are required - up to 75 V can be achieved.
  • Extending Battery Life With the TPS61040 Low Power DC-DC Boost Converter
    PDF, 65 Kb, 档案已发布: Jul 17, 2006
    This document describes application examples and reference designs for the TPS61040 boost converter. The following application example describes how to implement the TPS61040 low-power, dc-dc boost converter to drive white light LEDs. Also provided are design equations for calculating the proper resistor values for a white LED driver that includes provisions for dimming the LED brightness. The ref
  • High Voltage Power Supply Using a Highly Integrated DC/DC Converter (TPS61040)
    PDF, 33 Kb, 档案已发布: Jun 19, 2003
    The TPS61040 is a highly integrated, low power, boost converter capable of delivering output voltages up to 28 V. However, using a coupled inductor enables the TPS61040 to be used in applications where higher voltages are required. Output voltages up to 75 V are achieved using this technique.
  • Extending Battery Life with the TPS61040 White Light LED Driver
    PDF, 64 Kb, 档案已发布: May 3, 2002
    This application note describes how to extend the battery life of a circuit that uses Texas Instrument's TPS61040 low power dc-dc boost converter for driving white light LEDs. Power loss in the current sense resistor is discussed, and a method for reducing this loss is presented. Design equations are given for calculating the proper resistor values for a white light LED driver that includes prov
  • Improved Overvoltage Protection for the TPS61040/1
    PDF, 78 Kb, 档案已发布: Mar 15, 2006
    This application report presents an improved overvoltage protection circuit using a Zener diode for the TPS61040/1.
  • Feedforward Capacitor Makes Boost Converter Fast and Stable
    PDF, 1.0 Mb, 档案已发布: Nov 2, 2016
  • White Light LED Driver With Gradual Dimming (Rev. A)
    PDF, 177 Kb, 修订版: A, 档案已发布: Jan 10, 2007
    Many consumer products using white light LEDs for illumination and backlighting provide gradual LED illumination at turnon and turnoff. This gradual illumination is usually achieved with the aid of a microprocessor that provides PWM dimming control. This circuit uses the Texas Instruments TPS61040 white light LED driver to provide gradual illumination at turnon and turnoff without the use of a mic
  • Single Cell TPS61041 LED Driver
    PDF, 69 Kb, 档案已发布: Jun 9, 2003
    This application report shows how to operate the TPS61041 in a constant current LED drive configuration from input voltages less than 1.8 V. Although most applications using this device connect the VIN pin to the boost inductor, L1, as shown in Figure 1, this is not required. Separating the power stage from the control IC, allows the use of input voltages that are both above or below the operating
  • Using the TPS61040 in High Voltage Applications
    PDF, 69 Kb, 档案已发布: May 16, 2005
    The TPS61040 is a highly integrated, low-power, boost converter capable of delivering output voltages up to 28 V with input voltages up to 6 V. However, using an external transistor in a cascode configuration enables the TPS61040 to be used in applications where higher input or output voltages are required. Output voltages in the 100s of volts are achievable using this technique.
  • Coupled inductors broaden DC/DC converter usage
    PDF, 140 Kb, 档案已发布: Aug 11, 2010
  • High Voltage Power Supply Using the TPS61040
    PDF, 32 Kb, 档案已发布: Jul 9, 2002
    The TPS61040 is a highly integrated, low power, boost converter capable of delivering output voltages up to 28 V. The addition of two small diodes and two small capacitors enables the TPS61040 to deliver output voltages up to 50 V.
  • TPS61040 Inverter Design (Rev. A)
    PDF, 56 Kb, 修订版: A, 档案已发布: Jun 9, 2003
    Although designed to be a positive voltage boost converter, the TPS61040 can be configured as an inverting converter using an OPA348 operational amplifier or equivalent to invert the feedback signal.
  • TPS61042 Dual Li-Ion and Higher Input Voltages
    PDF, 46 Kb, 档案已发布: Mar 13, 2003
    This document shows how to operate the TPS61042 from input voltages greater than 6 V. The ability to operate from input voltages greater than 6 V allows the TPS61042 to operate from dual Li-Ion or higher input voltages.
  • 3Q 2010 Issue Analog Applications Journal
    PDF, 1.5 Mb, 档案已发布: Aug 11, 2010
  • Design considerations for a resistive feedback divider in a DC/DC converter
    PDF, 393 Kb, 档案已发布: Apr 26, 2012
  • Optimizing Transient Response of Internally Compensated DC-DC Converters (Rev. A)
    PDF, 1.1 Mb, 修订版: A, 档案已发布: May 11, 2015
  • Extending the Soft Start Time Without a Soft Start Pin (Rev. B)
    PDF, 387 Kb, 修订版: B, 档案已发布: Jun 15, 2017
  • IQ: What it is what it isn’t and how to use it
    PDF, 198 Kb, 档案已发布: Jun 17, 2011
  • Performing Accurate PFM Mode Efficiency Measurements (Rev. A)
    PDF, 418 Kb, 修订版: A, 档案已发布: Dec 11, 2018
    When performing measurements on DC-DC converters using pulse frequency modulation(PFM)or any power save mode proper care must be taken to ensure that the measurements are accurate. An accurate PFM mode efficiency measurement is critical for systems which require high efficiency at low loads such as in smart home systems tablets wearables and metering.

模型线

制造商分类

  • Semiconductors > Power Management > Non-isolated DC/DC Switching Regulator > Step-Up (Boost) > Boost Converter (Integrated Switch)