Datasheet Texas Instruments TPS61096DSST — 数据表
| 制造商 | Texas Instruments |
| 系列 | TPS61096 |
| 零件号 | TPS61096DSST |
具有1-ВµA静态电流12-WSON的28V输出电压升压转换器-40至85
数据表
价格
状态
| Lifecycle Status | Active (Recommended for new designs) |
| Manufacture's Sample Availability | No |
打包
| Pin | 12 |
| Package Type | DSS |
| Industry STD Term | WSON |
| JEDEC Code | R-PDSO-N |
| Package QTY | 250 |
| Carrier | SMALL T&R |
| Device Marking | S61096 |
| Width (mm) | 3 |
| Length (mm) | 2 |
| Thickness (mm) | .75 |
| Pitch (mm) | .5 |
| Max Height (mm) | .8 |
| Mechanical Data | 下载 |
参数化
| Approx. Price (US$) | 0.80 | 1ku |
| Duty Cycle(Max)(%) | 90 |
| Iq(Typ)(mA) | 0.001 |
| Operating Temperature Range(C) | -40 to 85 |
| Package Group | WSON |
| Rating | Catalog |
| Regulated Outputs(#) | 1 |
| Special Features | Adjustable Current Limit Enable Light Load Efficiency |
| Switch Current Limit(Min)(A) | 0.4 |
| Switch Current Limit(Typ)(A) | 0.5 |
| Type | Converter |
| Vin(Max)(V) | 5.5 |
| Vin(Min)(V) | 1.8 |
| Vout(Max)(V) | 28 |
| Vout(Min)(V) | 4.5 |
生态计划
| RoHS | Compliant |
| Pb Free | Yes |
设计套件和评估模块
- Evaluation Modules & Boards: TPS61096EVM-787
Evaluation Board for TPS61096 28-V Output Voltage Boost Converter with Ultra-Low Quiescent Current
Lifecycle Status: Active (Recommended for new designs)
应用须知
- AN-1112 DSBGA Wafer Level Chip Scale Package (Rev. AG)PDF, 13.7 Mb, 修订版: AG, 档案已发布: Aug 12, 2015
- Automated Frequency Response AnalyzerPDF, 939 Kb, 档案已发布: Oct 9, 2013
This application report discusses a new method of doing stability Analysis testing by using basic labequipment, while not requiring any specific instruments. - Minimizing Ringing at the Switch Node of a Boost ConverterPDF, 201 Kb, 档案已发布: Sep 15, 2006
The application report explains how to use proper board layout and/or a snubber to reduce high-frequency ringing at the switch node of a boost converter. - Design considerations for a resistive feedback divider in a DC/DC converterPDF, 393 Kb, 档案已发布: Apr 26, 2012
- Basic Calculation of a Boost Converter's Power Stage (Rev. C)PDF, 186 Kb, 修订版: C, 档案已发布: Jan 8, 2014
This application note gives the equations to calculate the power stage of a boost converter built with an IC with integrated switch and operating in continuous conduction mode. It is not intended to give details on the functionality of a boost converter (see Reference 1) or how to compensate a converter. See the references at the end of this document if more detail is needed. - Optimizing Transient Response of Internally Compensated DC-DC Converters (Rev. A)PDF, 1.1 Mb, 修订版: A, 档案已发布: May 11, 2015
- IQ: What it is what it isn’t and how to use itPDF, 198 Kb, 档案已发布: Jun 17, 2011
- Performing Accurate PFM Mode Efficiency Measurements (Rev. A)PDF, 418 Kb, 修订版: A, 档案已发布: Dec 11, 2018
When performing measurements on DC-DC converters using pulse frequency modulation(PFM)or any power save mode proper care must be taken to ensure that the measurements are accurate. An accurate PFM mode efficiency measurement is critical for systems which require high efficiency at low loads such as in smart home systems tablets wearables and metering.
模型线
系列: TPS61096 (2)
- TPS61096DSSR TPS61096DSST
制造商分类
- Semiconductors > Power Management > Non-isolated DC/DC Switching Regulator > Step-Up (Boost) > Boost Converter (Integrated Switch)