Datasheet Texas Instruments TPS61175QPWPRQ1 — 数据表

制造商	Texas Instruments
系列	TPS61175-Q1
零件号	TPS61175QPWPRQ1

数据表

价格

状态

打包

参数化

生态计划

设计套件和评估模块

• Evaluation Modules & Boards: TPS61175EVM-326
  TPS61175 12V Input, 24V Output, 1.2A Evaluation Module
  Lifecycle Status: Active (Recommended for new designs)
  
  • 下载
• Evaluation Modules & Boards: TPS61175EVM-588
  TPS61175 9V to 18V Input, 12V Output, SEPIC Evaluation Module
  Lifecycle Status: Active (Recommended for new designs)
  
  • 下载

应用须知

• 下载
  Simple Power Good circuit using the TPS61175 FREQ pin as reference
  PDF, 80 Kb, 档案已发布: May 5, 2009
  The TPS61175 FREQ pin can provide a 1.229V reference for use in other circuits, including a power good circuit.
• 下载
  Designing a Split-Rail SEPIC With the TPS61175
  PDF, 493 Kb, 档案已发布: Feb 2, 2010
  Often a regulated DC output voltage is needed between the minimum and maximum input voltages of a DC/DC converter, but neither a buck or boost converter in standard configurations is sufficient. However, a boost converter integrated circuit (IC) can be configured to drive a single-ended, primary inductor converter (SEPIC) power stage and provide an output voltage that is between the input voltage
• 下载
  Understanding TPS61175's Pulse-Skipping Function
  PDF, 643 Kb, 档案已发布: Jul 30, 2009
• 下载
  How to Design a SEPIC Converter With the TPS61175
  PDF, 586 Kb, 档案已发布: Jun 12, 2009
  When a dc/dc converter providing a regulated output voltage between the minimum and maximum input voltage is required, neither a single buck or a boost converter can provide the output voltage. However, a boost converter integrated circuit (IC) can be configured to drive a single-ended, primary-inductor converter (SEPIC) power stage and provide an output voltage that is between the input voltage e
• 下载
  Description Compensating the Current Mode Boost Control Loop
  PDF, 411 Kb, 档案已发布: Dec 9, 2010
• 下载
  Extending the Input Voltage Range of the TPS6116x/8x/9x WLED Drivers
  PDF, 124 Kb, 档案已发布: Aug 12, 2009
  The TPS6116x, TPS6118x and TPS6119x WLED driver and TPS6117x boost converter integrated circuits (IC) can operate with different input voltages, one powering the IC itself and the other powering the boost power stage. This application report explains various options on how to use the WLED drivers with split power rails. This allows these LED drivers to be used in applications where the available
• 下载
  Using a portable-power boost converter in an isolated flyback application
  PDF, 535 Kb, 档案已发布: Mar 11, 2009
• 下载
  Using the TPS6215x in an Inverting Buck-Boost Topology.. (Rev. C)
  PDF, 738 Kb, 修订版: C, 档案已发布: Dec 19, 2012
• 下载
  Q1 2009 Issue Analog Applications Journal
  PDF, 1.4 Mb, 档案已发布: Mar 11, 2009
• 下载
  Design considerations for a resistive feedback divider in a DC/DC converter
  PDF, 393 Kb, 档案已发布: Apr 26, 2012
• 下载
  Basic Calculation of a Boost Converter's Power Stage (Rev. C)
  PDF, 186 Kb, 修订版: C, 档案已发布: Jan 8, 2014
  This application note gives the equations to calculate the power stage of a boost converter built with an IC with integrated switch and operating in continuous conduction mode. It is not intended to give details on the functionality of a boost converter (see Reference 1) or how to compensate a converter. See the references at the end of this document if more detail is needed.
• 下载
  IQ: What it is what it isn’t and how to use it
  PDF, 198 Kb, 档案已发布: Jun 17, 2011
• 下载
  Performing Accurate PFM Mode Efficiency Measurements (Rev. A)
  PDF, 418 Kb, 修订版: A, 档案已发布: Dec 11, 2018
  When performing measurements on DC-DC converters using pulse frequency modulation(PFM)or any power save mode proper care must be taken to ensure that the measurements are accurate. An accurate PFM mode efficiency measurement is critical for systems which require high efficiency at low loads such as in smart home systems tablets wearables and metering.

模型线

制造商分类

• Semiconductors > Power Management > Non-isolated DC/DC Switching Regulator > Step-Up (Boost) > Boost Converter (Integrated Switch)