Datasheet Texas Instruments THS3095DG4 — 数据表

制造商Texas Instruments
系列THS3095
零件号THS3095DG4
Datasheet Texas Instruments THS3095DG4

具有断电8-SOIC的单路高电压,低失真,电流反馈运算放大器-40至85

数据表

THS309x High-voltage, Low-distortion, Current-feedback Operational Amplifiers datasheet
PDF, 1.5 Mb, 修订版: H, 档案已发布: Dec 31, 2015
从文件中提取

价格

状态

Lifecycle StatusActive (Recommended for new designs)
Manufacture's Sample AvailabilityYes

打包

Pin8
Package TypeD
Industry STD TermSOIC
JEDEC CodeR-PDSO-G
Package QTY75
CarrierTUBE
Device Marking3095
Width (mm)3.91
Length (mm)4.9
Thickness (mm)1.58
Pitch (mm)1.27
Max Height (mm)1.75
Mechanical Data下载

参数化

2nd Harmonic66 dBc
3rd Harmonic74 dBc
@ MHz10
Acl, min spec gain1 V/V
Additional FeaturesShutdown
ArchitectureBipolar,Current FB
BW @ Acl235 MHz
CMRR(Min)62 dB
CMRR(Typ)69 dB
GBW(Typ)235 MHz
Input Bias Current(Max)15000000 pA
Iq per channel(Max)10.5 mA
Iq per channel(Typ)9.5 mA
Number of Channels1
Offset Drift(Typ)10 uV/C
Operating Temperature Range-40 to 85 C
Output Current(Typ)250 mA
Package GroupSOIC
Package Size: mm2:W x L8SOIC: 29 mm2: 6 x 4.9(SOIC) PKG
Rail-to-RailNo
RatingCatalog
Slew Rate(Typ)7300 V/us
Total Supply Voltage(Max)30 +5V=5, +/-5V=10
Total Supply Voltage(Min)10 +5V=5, +/-5V=10
Vn at 1kHz(Typ)2 nV/rtHz
Vn at Flatband(Typ)2 nV/rtHz
Vos (Offset Voltage @ 25C)(Max)3 mV

生态计划

RoHSCompliant

设计套件和评估模块

  • Evaluation Modules & Boards: THS3091EVM
    THS3091 Evaluation Module
    Lifecycle Status: Active (Recommended for new designs)
  • Evaluation Modules & Boards: THS3095EVM
    THS3095 Evaluation Module
    Lifecycle Status: Active (Recommended for new designs)

应用须知

  • Design of Differential Filters for High-Speed Signal Chains (Rev. B)
    PDF, 166 Kb, 修订版: B, 档案已发布: Apr 30, 2010
    Differential filters have many desirable attributes. The task of designing differential filters can seem daunting at first. Single-ended filters designed in any filter design package can be converted to a differential implementation. This application report explores simple conversion techniques for low-pass, high-pass, and band-pass LC filters.
  • Interfacing op amps to high-speed DACs, Part 1: Current-sinking DACs
    PDF, 319 Kb, 档案已发布: Jul 14, 2009
  • Interfacing op amps to high-speed DACs, Part 2: Current-sourcing DACs
    PDF, 617 Kb, 档案已发布: Oct 4, 2009
  • Design for a Wideband Differential Transimpedance DAC Output (Rev. A)
    PDF, 438 Kb, 修订版: A, 档案已发布: Oct 17, 2016
    High-speed digital-to-analog converters commonly offer a complementary current output signal. Most output interface implementations use either a resistive load and/or a transformer to convert this current source signal to a voltage. Where a dc-coupled interface is required, a carefully designed differential transimpedance stage can offer an attractive alternative. Design considerations and options
  • Q3 2009 Issue Analog Applications Journal
    PDF, 2.1 Mb, 档案已发布: Jul 14, 2009
  • Voltage Feedback vs. Current Feedback Op Amps
    PDF, 93 Kb, 档案已发布: Nov 30, 1998
    This application report contrasts and compares the characteristics and capabilities of voltage and current feedback operational amplifiers. The report also points out the many similarities between the two versions.
  • Stabilizing Current-Feedback Op Amps While Optimizing Circuit Performance
    PDF, 280 Kb, 档案已发布: Apr 28, 2004
    Optimizing a circuit design with a current-feedback (CFB) op amp is a relatively straightforward task, once one understands how CFB op amps achieve stability. This application note explains a 2nd-order CFB model so that any designer can better understand the flexibility of the CFB op amp. This report also discusses stability analysis, the effects of parasitic components due to PCBs, optimization
  • Q4 2009 Issue Analog Applications Journal
    PDF, 1.5 Mb, 档案已发布: Oct 4, 2009
  • Designing for low distortion with high-speed op amps
    PDF, 277 Kb, 档案已发布: Mar 2, 2005
  • Noise Analysis for High Speed Op Amps (Rev. A)
    PDF, 256 Kb, 修订版: A, 档案已发布: Jan 17, 2005
    As system bandwidths have increased an accurate estimate of the noise contribution for each element in the signal channel has become increasingly important. Many designers are not however particularly comfortable with the calculations required to predict the total noise for an op amp or in the conversions between the different descriptions of noise. Considerable inconsistency between manufactu

模型线

制造商分类

  • Semiconductors > Amplifiers > Operational Amplifiers (Op Amps) > High-Speed Op Amps (>=50MHz)