UC1708
UC2708
UC3708 www.ti.com SLUS171C – MARCH 1997 – REVISED SEPTEMBER 2007 DUAL NON-INVERTING POWER DRIVER FEATURES 1 3.0A Peak Current Totem Pole Output
5 to 35V Operation
25ns Rise and Fall Times
25ns Propagation Delays
Thermal Shutdown and Under-Voltage
Protection High-Speed, Power MOSFET Compatible
Efficient High Frequency Operation
Low Cross-Conduction Current Spike
Enable and Shutdown Functions
Wide Input Voltage Range
ESD Protection to 2kV DESCRIPTION
The UC1708 family of power drivers is made with a high-speed, high-voltage, Schottky process to interface
control functions and high-power switching devices – particularly power MOSFETs. Operating over a 5 V to 35 V
supply range, these devices contain two independent channels. The A and B inputs are compatible with TTL and
CMOS logic families, but can withstand input voltages as high as VIN. Each output can source or sink up to 3 A
as long as power dissipation limits are not exceeded.
Although each output can be activated independently with its own inputs, they can be forced low in common
through the action of either a digital high signal at the Shutdown terminal or by forcing the Enable terminal low.
The Shutdown terminal will only force the outputs low, it will not effect the behavior of the rest of the device. The
Enable terminal effectively places the device in under-voltage lockout, reducing power consumption by as much
as 90%. During under-voltage and disable (Enable terminal forced low) conditions, the outputs are held in a …