Datasheet Texas Instruments LM3488MMX — 数据表
| 制造商 | Texas Instruments |
| 系列 | LM3488 |
| 零件号 | LM3488MMX |
用于开关稳压器的40V宽Vin低侧N通道控制器8-VSSOP -40至125
数据表
LM3488/-Q1 Automotive High-Efficiency Controller for Boost, SEPIC and Fly-Back DC-DC Converters datasheet
PDF, 1.7 Mb, 修订版: O, 档案已发布: Jul 6, 2015
从文件中提取
价格
状态
| Lifecycle Status | NRND (Not recommended for new designs) |
| Manufacture's Sample Availability | No |
打包
| Pin | 8 |
| Package Type | DGK |
| Industry STD Term | VSSOP |
| JEDEC Code | R-PDSO-G |
| Device Marking | S21B |
| Width (mm) | 3 |
| Length (mm) | 3 |
| Thickness (mm) | .97 |
| Pitch (mm) | .65 |
| Max Height (mm) | 1.07 |
| Mechanical Data | 下载 |
替代品
| Replacement | LM3488MMX/NOPB |
| Replacement Code | S |
参数化
| Approx. Price (US$) | 0.80 | 1ku |
| Duty Cycle(Max)(%) | 100 |
| Iout(Max)(A) | 10 |
| Iq(Typ)(mA) | 2.7 |
| Operating Temperature Range(C) | -40 to 125 |
| Package Group | VSSOP |
| Rating | Catalog |
| Regulated Outputs(#) | 1 |
| Special Features | Adjustable Current Limit Enable Frequency Synchronization Light Load Efficiency Pre-Bias Start-Up |
| Switch Current Limit(Typ)(A) | 10 |
| Switching Frequency(Max)(kHz) | 1000 |
| Switching Frequency(Min)(kHz) | 100 |
| Type | Controller |
| Vin(Max)(V) | 40 |
| Vin(Min)(V) | 2.97 |
| Vout(Max)(V) | 500 |
| Vout(Min)(V) | 1.26 |
生态计划
| RoHS | Not Compliant |
| Pb Free | No |
应用须知
- LM34xx How to Design Flyback Converter with LM3481 Boost ControllerPDF, 1.7 Mb, 档案已发布: Sep 21, 2016
The TexasInstrumentsLM3481boostcontrolleris a versatilelow-sideN-FEThigh-performancecontrollerfor switchingregulators.Thedevicehaswiderangeof applicationssuchas automotivestart-stopapplication,one-cellor two-cellLi-ionbattery-poweredportableBluetoothaudiosystem,industrialsystemisolatedsupplies,and so forth,and supportstopologi - AN-1286 Compensation For The LM3478 Boost Controller (Rev. C)PDF, 356 Kb, 修订版: C, 档案已发布: Apr 23, 2013
The LM3478 is a low side N-Channel controller for switching regulators. Like many switching controllers,the added flexibility in component selection can cause problems for users when determining thecompensation scheme. It is the goal of this application report to present a decent groundwork to allow thereader to select with confidence the correct compensation components. To achieve this we l - AN-1484 Designing A SEPIC Converter (Rev. E)PDF, 220 Kb, 修订版: E, 档案已发布: Apr 23, 2013
In a single ended primary inductance converter (SEPIC) design, the output voltage can be higher or lowerthan the input voltage. The SEPIC converter shown in Figure 1 uses two inductors: L1 and L2. The twoinductors can be wound on the same core since the same voltages are applied to them throughout theswitching cycle. - Modeling & Design of Current Mode Control Boost Converters (Rev. B)PDF, 316 Kb, 修订版: B, 档案已发布: Apr 23, 2013
This application note presents a detail modeling and design of current mode control boost convertersoperating in the continuous conduction mode (CCM). Based on the derived small signal models, thedesign of a lag compensator for current mode control boost converters will be detailed. The LM3478 boostcontroller will be used in the example. Simulation and hardware measurement of frequency respo - AN-1990 Compensation for Current Mode Control SEPIC Converters (Rev. A)PDF, 247 Kb, 修订版: A, 档案已发布: Apr 23, 2013
This application note discusses the use of SEPIC converters in various applications.
模型线
系列: LM3488 (4)
- LM3488MM LM3488MM/NOPB LM3488MMX LM3488MMX/NOPB
制造商分类
- Semiconductors > Power Management > Non-isolated DC/DC Switching Regulator > Step-Up (Boost) > Boost Controller (External Switch)