Datasheet Texas Instruments TPS62050DGS — 数据表

制造商	Texas Instruments
系列	TPS62050
零件号	TPS62050DGS

采用MSOP-10 10-VSSOP的可调800mA，10V Vin，95％高效降压转换器-40至85

数据表

下载

PDF, 1.1 Mb, 修订版: F, 档案已发布: Jun 26, 2015

从文件中提取

价格

状态

Lifecycle Status	Active (Recommended for new designs)
Manufacture's Sample Availability	Yes

打包

Pin	10
Package Type	DGS
Industry STD Term	VSSOP
JEDEC Code	S-PDSO-G
Package QTY	80
Carrier	TUBE
Device Marking	BFM
Width (mm)	3
Length (mm)	3
Thickness (mm)	1.02
Pitch (mm)	.5
Max Height (mm)	1.07
Mechanical Data	下载

参数化

Control Mode	Voltage Mode
Duty Cycle(Max)	100 %
Iout(Max)	0.8 A
Iq(Typ)	0.012 mA
Operating Temperature Range	-40 to 85 C
Package Group	VSSOP
Rating	Catalog
Regulated Outputs	1
Special Features	Enable,Frequency Synchronization,Light Load Efficiency,Power Good,Synchronous Rectification
Switching Frequency(Max)	1200 kHz
Switching Frequency(Min)	600 kHz
Type	Converter
Vin(Max)	10 V
Vin(Min)	2.7 V
Vout(Max)	6 V
Vout(Min)	0.7 V

生态计划

RoHS

Compliant

设计套件和评估模块

Evaluation Modules & Boards: TPS62052EVM-234
TPS62052 Evaluation Module
Lifecycle Status: Active (Recommended for new designs)
- 下载
Evaluation Modules & Boards: TPS62050EVM-234
TPS62050 Evaluation Module
Lifecycle Status: Active (Recommended for new designs)
- 下载

应用须知

下载
Maximum Output Current of TPS62050
PDF, 51 Kb, 档案已发布: Mar 19, 2003
The TPS62050 is a highly integrated synchronous step-down dc/dc converter capable of delivering output up to 800 mA. However, the maximum output current is limited by parameters such as ambient temperature, input-output voltage ratio, and switching frequency. This application report provides the maximum allowable output current of the TPS62050.
下载
Adding Hysteresis to Low Battery Input on the TPS6205x (Rev. A)
PDF, 89 Kb, 修订版: A, 档案已发布: Nov 28, 2007
The low-battery input (LBI), available on several step-down converters, is often used to shut down the converter when the input voltage falls below a set threshold. This prevents damage to the battery and signals that the battery is at the end of its life and should be charged or replaced. Batteries have internal resistance that causes the voltage to drop as the load increases. This internal resis
下载
Optimizing Resistor Dividers at a Comparator (Rev. A)
PDF, 120 Kb, 修订版: A, 档案已发布: Jun 3, 2013
下载
Design considerations for a resistive feedback divider in a DC/DC converter
PDF, 393 Kb, 档案已发布: Apr 26, 2012
下载
Optimizing Transient Response of Internally Compensated DC-DC Converters (Rev. A)
PDF, 1.1 Mb, 修订版: A, 档案已发布: May 11, 2015
下载
Five steps to a great PCB layout for a step-down converter
PDF, 162 Kb, 档案已发布: Jan 29, 2015
下载
Understanding the Absolute Maximum Ratings of the SW Node (Rev. A)
PDF, 755 Kb, 修订版: A, 档案已发布: Jan 13, 2012
下载
Testing tips for applying external power to supply outputs without an input volt
PDF, 110 Kb, 档案已发布: Oct 24, 2016
下载
Basic Calculation of a Buck Converter's Power Stage (Rev. B)
PDF, 202 Kb, 修订版: B, 档案已发布: Aug 17, 2015
下载
Extending the Soft Start Time Without a Soft Start Pin (Rev. B)
PDF, 387 Kb, 修订版: B, 档案已发布: Jun 15, 2017
下载
Choosing an Appropriate Pull-up/Pull-down Resistor for Open Drain Outputs
PDF, 130 Kb, 档案已发布: Sep 19, 2011
下载
IQ: What it is what it isn’t and how to use it
PDF, 198 Kb, 档案已发布: Jun 17, 2011
下载
Performing Accurate PFM Mode Efficiency Measurements (Rev. A)
PDF, 418 Kb, 修订版: A, 档案已发布: Dec 11, 2018
When performing measurements on DC-DC converters using pulse frequency modulation(PFM)or any power save mode proper care must be taken to ensure that the measurements are accurate. An accurate PFM mode efficiency measurement is critical for systems which require high efficiency at low loads such as in smart home systems tablets wearables and metering.

模型线

系列: TPS62050 (5)

HPA00314DGSR TPS62050DGS TPS62050DGSG4 TPS62050DGSR TPS62050DGSRG4

制造商分类

Semiconductors > Power Management > Non-isolated DC/DC Switching Regulator > Step-Down (Buck) > Buck Converter (Integrated Switch)