Datasheet Texas Instruments OPA2277PG4 — 数据表
| 制造商 | Texas Instruments |
| 系列 | OPA2277 |
| 零件号 | OPA2277PG4 |
10ВµV，0.1ВµV /ЛљC，高精度，低功耗运算放大器8-PDIP
数据表
OPAx277 High Precision Operational Amplifiers datasheet
PDF, 1.7 Mb, 修订版: B, 档案已发布: Jun 30, 2015
从文件中提取
价格
状态
| Lifecycle Status | Active (Recommended for new designs) |
| Manufacture's Sample Availability | Yes |
打包
| Pin | 8 |
| Package Type | P |
| Industry STD Term | PDIP |
| JEDEC Code | R-PDIP-T |
| Package QTY | 50 |
| Carrier | TUBE |
| Device Marking | OPA2277P |
| Width (mm) | 6.35 |
| Length (mm) | 9.81 |
| Thickness (mm) | 3.9 |
| Pitch (mm) | 2.54 |
| Max Height (mm) | 5.08 |
| Mechanical Data | 下载 |
参数化
| Additional Features | N/A |
| Architecture | Bipolar |
| CMRR(Min) | 130 dB |
| CMRR(Typ) | 140 dB |
| GBW(Typ) | 1 MHz |
| Input Bias Current(Max) | 1000 pA |
| Iq per channel(Max) | 0.825 mA |
| Iq per channel(Typ) | 0.79 mA |
| Number of Channels | 2 |
| Offset Drift(Typ) | 0.1 uV/C |
| Operating Temperature Range | -40 to 85 C |
| Output Current(Typ) | 35 mA |
| Package Group | PDIP |
| Package Size: mm2:W x L | See datasheet (PDIP) PKG |
| Rail-to-Rail | In,Out |
| Rating | Catalog |
| Slew Rate(Typ) | 0.8 V/us |
| Total Supply Voltage(Max) | 36 +5V=5, +/-5V=10 |
| Total Supply Voltage(Min) | 4 +5V=5, +/-5V=10 |
| Vn at 1kHz(Typ) | 8 nV/rtHz |
| Vos (Offset Voltage @ 25C)(Max) | 0.025 mV |
生态计划
| RoHS | Not Compliant |
应用须知
- OPA277 OPA2277 OPA4277 EMI Immunity Performance (Rev. A)PDF, 88 Kb, 修订版: A, 档案已发布: Oct 31, 2012
- High-Voltage Signal Conditioning for Low Voltage ADCsPDF, 135 Kb, 档案已发布: Jun 15, 2004
Analog designers are frequently required to develop circuits that convert high-voltage signals to levels acceptable for low-voltage data converters. This paper describes several solutions for this common task using modern amplifiers and typical power supplies. Five examples of conditioning ±10V bipolar signals for low-voltage single-rail analog-to-digital converters(ADCs) are presented: - Precision Absolute Value CircuitsPDF, 100 Kb, 档案已发布: Oct 2, 2000
You can build a precision absolute value circuit using two op amps and two precision resistors. If you use an op amp and an IC difference amplifier no user supplied precision resistors or resistor adjustments are required. Circuits shown are suitable for precision split supply operation and for single-supply operation. When used with a rail-to-rail op amp the single supply circuit can approach a - Tuning in AmplifiersPDF, 44 Kb, 档案已发布: Oct 2, 2000
Have you ever had the experience of designing an analog gain block with an amplifier that is specified to be unity gain stable only to find that it is oscillating out of control in your circuit? Or have you ever replaced a stable voltage feedback amplifier with a current feedback amplifier to find that the current feedback amplifier immediately oscillates when placed in the amplifier socket? Oscil - Single-Supply Operation of Operational AmplifiersPDF, 77 Kb, 档案已发布: Oct 2, 2000
Operation of op amps from single supply voltages is useful when negative supply voltages are not available. Furthermore, certain applications using high voltage and high current op amps can derive important benefits from single supply operation. - Op Amp Performance AnalysisPDF, 76 Kb, 档案已发布: Oct 2, 2000
This bulletin reflects the analysis power gained through knowledge of an op amp circuit's feedback factor. Feedback dictates the performance of an op amp both in function and in quality. The major specifications of the amplifier descibe an open-loop device awaiting feedback direction of the end circuit's function. Just how well the amplifier performs the function reflects through the feedback inte
模型线
系列: OPA2277 (15)
制造商分类
- Semiconductors > Amplifiers > Operational Amplifiers (Op Amps) > Precision Op Amps