Datasheet Texas Instruments OPA2277UG4 — 数据表

制造商Texas Instruments
系列OPA2277
零件号OPA2277UG4

10µV,0.1µV /˚C,高精度,低功耗运算放大器8-SOIC -40至85

数据表

OPAx277 High Precision Operational Amplifiers datasheet
PDF, 1.7 Mb, 修订版: B, 档案已发布: Jun 30, 2015
从文件中提取

价格

状态

Lifecycle StatusActive (Recommended for new designs)
Manufacture's Sample AvailabilityYes

打包

Pin88
Package TypeDD
Industry STD TermSOICSOIC
JEDEC CodeR-PDSO-GR-PDSO-G
Package QTY7575
CarrierTUBETUBE
Device Marking2277UOPA
Width (mm)3.913.91
Length (mm)4.94.9
Thickness (mm)1.581.58
Pitch (mm)1.271.27
Max Height (mm)1.751.75
Mechanical Data下载下载

参数化

Approx. price1.65 | 1ku US$
ArchitectureBipolar
CMRR(Min)130 dB
CMRR(Typ)140 dB
FeaturesSmall Size
GBW(Typ)1 MHz
Input bias current(Max)1000 pA
Input bias current(Typ)500 pA
Input common mode headroom (to negative supply)(Typ)2 V
Input common mode headroom (to positive supply)(Typ)-2 V
Iq per channel(Max)0.825 mA
Iq per channel(Typ)0.79 mA
Number of channels2
Offset drift(Typ)0.1 uV/C
Operating temperature range-40 to 85 C
Output current(Typ)35 mA
Output swing headroom (to negative supply)(Typ)0.5 V
Output swing headroom (to positive supply)(Typ)-1.2 V
Package GroupPDIP|8,SOIC|8,VSON|8
Package size: mm2:W x L8PDIP: 93 mm2: 9.43 x 9.81 (PDIP|8),8SOIC: 19 mm2: 3.91 x 4.9 (SOIC|8),8VSON: 16 mm2: 4 x 4 (VSON|8) PKG
Rail-to-railNo
RatingCatalog
Slew rate(Typ)0.8 V/us
Total supply voltage(Max)36 +5V=5, +/-5V=10
Total supply voltage(Min)4 +5V=5, +/-5V=10
Vn at 1 kHz(Typ)8 nV/rtHz
Vos (offset voltage @ 25 C)(Max)0.025 mV

生态计划

RoHSCompliant
Pb FreeYes

应用须知

  • OPA277 OPA2277 OPA4277 EMI Immunity Performance (Rev. A)
    PDF, 88 Kb, 修订版: A, 档案已发布: Oct 31, 2012
  • High-Voltage Signal Conditioning for Low Voltage ADCs
    PDF, 135 Kb, 档案已发布: Jun 15, 2004
    Analog designers are frequently required to develop circuits that convert high-voltage signals to levels acceptable for low-voltage data converters. This paper describes several solutions for this common task using modern amplifiers and typical power supplies. Five examples of conditioning ±10V bipolar signals for low-voltage single-rail analog-to-digital converters(ADCs) are presented:
  • Precision Absolute Value Circuits
    PDF, 100 Kb, 档案已发布: Oct 2, 2000
    You can build a precision absolute value circuit using two op amps and two precision resistors. If you use an op amp and an IC difference amplifier no user supplied precision resistors or resistor adjustments are required. Circuits shown are suitable for precision split supply operation and for single-supply operation. When used with a rail-to-rail op amp the single supply circuit can approach a

模型线

制造商分类

  • Semiconductors > Analog and Mixed-Signal > Amplifiers > Operational amplifiers (op amps) > Precision op amps (Vos<1mV)