Datasheet Linear Technology LT3575EFE#PBF — 数据表

制造商	Linear Technology
系列	LT3575
零件号	LT3575EFE#PBF

无需使用光耦合器的隔离型反激式转换器

数据表

预览并下载

PDF, 251 Kb, 语言: en, 文件上传: Jul 31, 2016, 页数: 24
Isolated Flyback Converter without an Opto-Coupler

从文件中提取

打包

Package	TSSOP-16
Package Code	FE
Package Index	05-08-1663 (BA)

参数化

Demo Boards	DC1643A
Design Tools	LTspice File
Export Control	no
Features	Boundary Mode Operation, No Opto Isolator
Frequency	1000 kHz
Integrated Inductor	no
Isupply	4.5 mA
Monolithic	yes
Number of Outputs	1
Operating Temperature Range	0 to 85 °C
Polyphase	no
Switch Current	3.5 A
Synchronous	no
Topology	Flyback
Vin Max	40 V
Vin Min	3 V
Vout Max	60 V
Vout Maximum	60V
Vswitch Max	60 V

生态计划

RoHS

Compliant

设计须知

下载
Micropower Isolated Flyback Converter with Input Voltage Range from 6V to 100V &mdash DN509
PDF, 723 Kb, 档案已发布: Oct 24, 2012
从文件中提取
Micropower Isolated Flyback Converter with Input Voltage
Range from 6V to 100V
Design Note 509
Zhongming Ye
Introduction
Flyback converters are widely used in isolated DC/DC
applications because of their relative simplicity and
low cost compared to alternative isolated topologies. Even so, designing a traditional flyback is not
easyвЂ”the transformer requires careful design, and
loop compensation is complicated by the well known
right-half plane (RHP) zero and the propagation delay
of the opto-coupler.
Linear TechnologyвЂ™s no-opto flyback converters, such
as the LT В® 3573, LT3574, LT3575, LT3511 and LT3512,
simplify the design of flyback converters by incorporating a primary-side sensing scheme and running the
converter in boundary mode. The LT8300 high voltage
monolithic isolated flyback converter further simplifies
flyback design by integrating a 260mA, 150V DMOS
power switch, an internal compensation network and a
soft-start capacitor. The LT8300 operates with input supply voltages from 6V to 100V and delivers output power
of up to 2W with as few as five external components.
The LT8300 operates in boundary mode and offers low
ripple Burst ModeВ® operation, enabling the design of …
下载
Monolithic No-Opto Isolated Flyback Converter Provides Versatile Solution &mdash DN525
PDF, 259 Kb, 档案已发布: Feb 10, 2014
从文件中提取
Monolithic No-Opto Isolated Flyback Converter Provides
Versatile Solution
Design Note 525
George Qian
Introduction
Traditionally, isolated power supplies use an optocoupler in the feedback loop to transfer regulation
information across the isolation barrier. Unfortunately,
an opto-couplerвЂ™s gain characteristic varies widely over
temperature and lifetime, increasing the difficulty of
power supply loop compensation.
Linear TechnologyвЂ™s line of no-opto flyback converters,
such as the LTВ®3573, LT3574, LT3575, LT3511, LT3512
and LT8300, simplify flyback design by incorporating
a primary-side sensing scheme, thereby eliminating
the need for an opto-isolator.
The LT8302 monolithic no-opto flyback converter
has an integrated 65V/3.6A DMOS power switch with
internal loop compensation and soft-start. The LT8302
can operate from an input voltage as low as 2.8V to
42V, and deliver output power up to 18W. It offers
low ripple Burst Mode В® operation at light loads, providing low standby power loss, and features a low
component count.
Performance and Ease of Use …

模型线

系列: LT3575 (4)

LT3575EFE#PBF LT3575EFE#TRPBF LT3575IFE#PBF LT3575IFE#TRPBF

制造商分类

Power Management > Switching Regulator > Flyback, Forward and Isolated Controllers

其他名称:

LT3575EFEPBF, LT3575EFE PBF