AP43776QAUTOMOTIVE-GRADE DUAL-CHANNEL USB TYPE-C PROTOCOL DECODERDescriptionPin Assignments The DIODES™ AP43776Q is a highly integrated, dual-channel, USB
Type-C®, PD3.1 / PPS, BC 1.2 and QC protocol decoder. It passes (Top View) certification of USB Type-C power delivery specification Rev 3.1 with PPS and Quick ChargeTM QC5 protocol. The device can support the full range of PPS APDO (augmented power data object) from 3.3V to 21V with 20mV/step voltage resolution and up to 6A current with 50mA/step resolution for power management. To enable output current beyond 3A, the AP43776Q supports e-Marker cable detection with built-in VCONN switch with 30mA driving capability and over-current protection (OCP). Cable- loss compensations are also embedded. During the power charging, AP43776Q can support Display Port Alternate Mode by decoding out the CC signal and deliver the routing signal to the mux switch through I2C interface, Meanwhile, the AP43776Q also supports BC1.2 CDP handshaking. The AP43776Q provides an embedded MCU and built-in ADC converters for voltage and temperature measurement, where over- temperature protection (OTP) and other specific functions can be implemented through I2C pins and rich GPIO pins. Working in conjunction with two I2C-equipped Buck-Boost controllers or converters which have PD3.1 PPS output circuitry, the AP43776Q serves as the I2C master and supports two independent PD3.1 PPS W-QFN4040-20 charging applications without using additional output enable MOS chips for each PD3.1 output port. With built-in firmware, the AP43776Q can support various smart power-management functions such as power-sharing scheme between two attached USB Type-C PD devices, low-battery power de-rating, thermal power de-rating, LED light indication, etc. Two AP43776Q devices can also be interconnected through a UART (GPIO) pin to implement smart power-sharing scheme for all four connected USB Type-C ports attached to a fixed power source. FeaturesFeatures (continued) AEC-Q100 Qualified with the Following Results: Totally Lead-Free & Fully RoHS Compliant (Notes 1 & 2) Device Temperature Grade 1: -40°C to +125°C TA Range Halogen and Antimony Free. “Green” Device (Note 3) Device HBM ESD Classification Level H3A The AP43776Q issuitable for automotive applications Device CDM ESD Classification Level C5 requiring specific change control; this part is AEC-Q100 Dual-channel independent USB Type-C PD3.1/PPS decoder qualified, PPAP capable, and manufactured in IATF 16949 USB-IF PD3.1/PPS certificated TID: 6206 certified facilities. Quick Charge™ QC5 certificated No.: QC20211008263 https://www.diodes.com/quality/product-definitions/ PD3.1/ full range of PPS VOUT (3.3V to 21V)
Compliant with BC1.2 DCP mode for QC2.0/3.0/4/4+/5 Applications Type-C PD Display Port Alternative mode BC 1.2 CDP (Charging Downstream Port) mode for Charging In-vehicle multi-port USB PD3.1 charging systems