Datasheet LTC2956 (Analog Devices) - 3

制造商Analog Devices
描述Wake-Up Timer with Pushbutton Control
页数 / 页28 / 3 — ELECTRICAL CHARACTERISTICS. The. denotes the specifications which apply …
文件格式/大小PDF / 325 Kb
文件语言英语

ELECTRICAL CHARACTERISTICS. The. denotes the specifications which apply over the full operating

ELECTRICAL CHARACTERISTICS The denotes the specifications which apply over the full operating

该数据表的模型线

文件文字版本

LTC2956
ELECTRICAL CHARACTERISTICS The
l
denotes the specifications which apply over the full operating temperature range, otherwise specifications are at TA = 25°C. VIN = 3.3V, RCOM = 100k unless otherwise noted. (Note 2) SYMBOL PARAMETER CONDITIONS MIN TYP MAX UNITS
VIN Supply Voltage Range l 1.5 36 V IIN VIN Supply Current Awake State, PB Hi l 3 10 µA Sleep State, PB Hi l 0.8 3 µA Off State, PB Hi l 0.3 1 µA VUVL VIN Undervoltage Lockout VIN Rising l 1.08 1.24 1.4 V VUVL(HYST) VIN Undervoltage Lockout Hysteresis 100 mV
Wake-Up Timer
tPERIOD Period Accuracy RPERIOD = 100kΩ l 237 250 263 ms RPERIOD Period-Setting Resistor Range l 32.4 324 kΩ
Timing (Refer to Timing Diagram)
tSLEEP_MIN Minimum Sleep Duration l 76 128 180 ms tAWAKE_MIN Minimum Awake Time l 4 8 12 ms tONMAX Maximum Awake Time SLEEP = 0V, CONMAX = 3900pF l 32 52 72 ms tDB PB Debounce Time PB Goes Low → EN Goes High l 19 32 45 ms tPD(SLEEP) SLEEP Propagation Delay SLEEP → EN Transitions l 2 4 ms tPBOUT_FIRST Width of First PBOUT Pulse After Entering Awake State l 76 128 180 ms tLONG Long Power Down Time RLONG = 9.76k, RCOM = 100k l 76 128 180 ms RLONG = Open, RCOM = 100k l 9.83 16.4 22.9 s tOFF OFFALERT Pulse Width PB = 2V l 0.6 1 1.4 s
Input Pins: PB, ONMAX, SLEEP
VPB(MIN,MAX) PB Voltage Range l –36 36 V IPB PB Input Current PB = 0V l –1 –4 –8 µA PB = –36V –400 µA VPB(TH) PB Input Threshold PB Falling l 0.5 0.9 1.5 V VPB(HYST) PB Input Hysteresis 0.7 V VPB(OC) PB Open Circuit Voltage IPB = 0µA, –1µA l 1.5 V RPB PB Pull-Up Resistance l 0.45 0.9 1.35 MΩ VSLEEP(TH) SLEEP Input Threshold Voltage SLEEP Falling l 0.7 1 1.3 V VSLEEP(HYST) SLEEP Input Hysteresis 80 mV ISLEEP SLEEP Leakage Current SLEEP = 1V l 0 ±100 nA VONMAX(TH) ONMAX Input Threshold Voltage ONMAX Rising l 0.6 1 1.5 V IONMAX ONMAX Pull-Up Current ONMAX = 0V l –1.1 –2 –2.8 µA 2956fa For more information www.linear.com/LTC2956 3