Datasheet MAX3430ESA+ - Maxim TRANSCEIVER IC — 数据表

Maxim MAX3430ESA+

Part Number: MAX3430ESA+

详细说明

Manufacturer: Maxim

Description: TRANSCEIVER IC

data sheetDownload Data Sheet

Docket:
19-2756; Rev 1; 4/03
±80V Fault-Protected, Fail-Safe, 1/4-Unit Load, +3.3V RS-485 Transceiver
General Description
The MAX3430 fault-protected RS-485 transceiver features ±80V protection from overvoltage signal faults on communication bus lines.

Each device contains one driver and one receiver, and the output pins can withstand faults, with respect to ground, of up to ±80V. Even if the faults occur when the transceiver is active, shut down, or powered off, the device will not be damaged. The MAX3430 operates from a 3.3V supply and features a slew-rate-limited driver that minimizes EMI and reduces reflections caused by improperly terminated cables, allowing errorfree data transmission at data rates up to 250kbps. The MAX3430 has a 1/4-unit-load receiver input impedance allowing up to 128 transceivers on a single bus and features fail-safe circuitry, which guarantees a logic-high receiver output when the receiver inputs are open. Hot-swap circuitry eliminates false transitions on the dat

RoHS: Yes