Datasheet Texas Instruments BQ24103RHLR — 数据表
| 制造商 | Texas Instruments |
| 系列 | BQ24103 |
| 零件号 | BQ24103RHLR |
带2A FET的独立同步开关模式锂离子充电器，采用QFN-20、1或2单元20-VQFN -40至85
数据表
bq241xx Synchronous Switched-Mode, Li-Ion and Li-Polymer Charge-Management IC With Integrated Power FETs (bqSWITCHERв„ў) datasheet
PDF, 1.5 Mb, 修订版: P, 档案已发布: Nov 30, 2015
从文件中提取
价格
状态
| Lifecycle Status | Active (Recommended for new designs) |
| Manufacture's Sample Availability | Yes |
打包
| Pin | 20 |
| Package Type | RHL |
| Industry STD Term | VQFN |
| JEDEC Code | R-PQFP-N |
| Package QTY | 3000 |
| Carrier | LARGE T&R |
| Device Marking | CID |
| Width (mm) | 3.5 |
| Length (mm) | 4.5 |
| Thickness (mm) | .9 |
| Pitch (mm) | .5 |
| Max Height (mm) | 1 |
| Mechanical Data | 下载 |
参数化
| Absolute Vin (safety rating)(Max)( | 20 V |
| Battery Charge Voltage(Max) | 4.2,8.4 V |
| Battery Charge Voltage(Min) | 4.2,8.4 V |
| Cell Chemistry | Li-Ion/Li-Polymer |
| Charge Current(Max) | 2 A |
| Control Interface | Standalone (RC-Settable) |
| Control Topology | Switch-Mode Buck |
| Number of Series Cells | 1,2 |
| Operating Vin(Max) | 16 V |
| Operating Vin(Min) | 4.35 V |
| Package Group | VQFN |
| Package Size: mm2:W x L | 20VQFN: 16 mm2: 3.5 x 4.5(VQFN) PKG |
| Special Features | Integrated FET,Temp Monitoring (Thermistor Pin) |
| USB Feature | N/A |
生态计划
| RoHS | Compliant |
设计套件和评估模块
- Evaluation Modules & Boards: BQ24103EVM
BQ24103 Evaluation Module
Lifecycle Status: Active (Recommended for new designs)
应用须知
- Using USB Power Supply With Standalone Chargers for Two-Cell Li Ion BatteriesPDF, 317 Kb, 档案已发布: Nov 22, 2013
- Li-ion switching charger integrates power FETsPDF, 142 Kb, 档案已发布: Oct 10, 2005
- bq24103/13/23/33 ComparisonPDF, 38 Kb, 档案已发布: Aug 12, 2011
This application report presents an overview of the differences among the bq24103, bq24113, bq24123 and bq24133. It assists design engineers in selecting the most suitable charger for their applications. - Power Dissipation Analysis & Circuit Design for Sync Switching Battery ChargerPDF, 402 Kb, 档案已发布: May 31, 2005
The bqSWITCHER(TM) (bq24100/03/05/08/13/15) is a highly integrated, switch-mode, Li-ion and Li-polymer battery charger IC. With two power MOSFETs, the gate drivers, and the controller fully integrated in the chip, the circuit design as well as the PCB layout has been appreciably simplified. However, it is still important to have a good understanding of the charger circuit design, layout principles - Implementations of Battery Charger and Power-Path Mgmt System Using bq241xxPDF, 752 Kb, 档案已发布: Jun 6, 2006
This application report presents four system topologies that can be used to fully implement a portable power management system solution using the bqSWITCHERв„ў. Test results and the advantages and issues of each topology are discussed. - Drive High Current LEDsPDF, 437 Kb, 档案已发布: Jan 25, 2007
This application report presents high-current LED driving requirements that use the TI integrated boost converter IC TPS6106x and integrated buck converter IC bqSWITCHERв„ў (bq2410x/11x/12x). Step-by-step design procedures, measurement results, and two dimming methods are provided and discussed.
模型线
系列: BQ24103 (2)
- BQ24103RHLR BQ24103RHLRG4
制造商分类
- Semiconductors > Power Management > Battery Management Products > Battery Charger IC