Datasheet Texas Instruments TLV2771ID — 数据表

制造商Texas Instruments
系列TLV2771
零件号TLV2771ID
Datasheet Texas Instruments TLV2771ID

单个2.7V高斜率轨至轨输出运算放大器8-SOIC -40至125

数据表

2.7-V High-Slew-Rate Rail-to-Rail Output Op Amps w/ Shutdown datasheet
PDF, 2.5 Mb, 修订版: G, 档案已发布: Feb 23, 2004
从文件中提取

价格

状态

Lifecycle StatusActive (Recommended for new designs)
Manufacture's Sample AvailabilityNo

打包

Pin8
Package TypeD
Industry STD TermSOIC
JEDEC CodeR-PDSO-G
Package QTY75
CarrierTUBE
Device Marking2771I
Width (mm)3.91
Length (mm)4.9
Thickness (mm)1.58
Pitch (mm)1.27
Max Height (mm)1.75
Mechanical Data下载

参数化

Additional FeaturesN/A
ArchitectureCMOS
CMRR(Min)60 dB
CMRR(Typ)96 dB
GBW(Typ)5.1 MHz
Input Bias Current(Max)60 pA
Iq per channel(Max)2 mA
Iq per channel(Typ)1 mA
Number of Channels1
Offset Drift(Typ)2 uV/C
Operating Temperature Range-40 to 125,0 to 70 C
Output Current(Typ)40 mA
Package GroupSOIC
Package Size: mm2:W x L8SOIC: 29 mm2: 6 x 4.9(SOIC) PKG
Rail-to-RailIn to V-,Out
RatingCatalog
Slew Rate(Typ)10.5 V/us
Total Supply Voltage(Max)5.5 +5V=5, +/-5V=10
Total Supply Voltage(Min)2.5 +5V=5, +/-5V=10
Vn at 1kHz(Typ)17 nV/rtHz
Vos (Offset Voltage @ 25C)(Max)2.5 mV

生态计划

RoHSCompliant

设计套件和评估模块

  • Evaluation Modules & Boards: OPAMPEVM
    Universal Operational Amplifier Evaluation Module
    Lifecycle Status: Active (Recommended for new designs)

应用须知

  • Signal Conditioning Piezoelectric Sensors (Rev. A)
    PDF, 58 Kb, 修订版: A, 档案已发布: Sep 28, 2000
    Piezoelectric elements are used to construct transducers for a vast number of different applications. Piezoelectric materials generate an electrical charge in response to mechanical movement or vice versa produce mechanical movement in response to electrical input. This report discusses the basic concepts of piezoelectric transducers used as sensors and two circuits commonly used for signal cond
  • TLV277x/TLV277xA EMI Immunity Performance
    PDF, 284 Kb, 档案已发布: Dec 20, 2012
  • Stability Analysis Of Voltage-Feedback Op Amps Including Compensation Technique (Rev. A)
    PDF, 197 Kb, 修订版: A, 档案已发布: Mar 12, 2001
    This report presents an analysis of the stability of voltage-feedback operational amplifiers (op amps) using circuit performance as the criteria to attain a successful design. It discusses several compensation techniques for op amps with and without internal compensation.
  • Conditioning a Switch-mode Power Supply Current Signal Using TI Op Amps
    PDF, 61 Kb, 档案已发布: Mar 23, 2000
    The switch-mode power supply primary current is often sensed using a power resistor. Using an op amp to amplify the current-sense signal can reduce cost and improve noise performance and efficiency. This report reviews the advantages of using an op amp circuit and analyzes the design criteria needed to choose the proper op amp.
  • Use of Rail-to-Rail Operational Amplifiers (Rev. A)
    PDF, 159 Kb, 修订版: A, 档案已发布: Dec 22, 1999
    This application report assists design engineers to understand the functionality and benefits of rail-to-rail operational amplifiers. It shows simplified schematics, functions, and characteristics of the input and output stages. Typical application schematics for rail-to-rail operational amplifiers are also discussed.

模型线

制造商分类

  • Semiconductors > Amplifiers > Operational Amplifiers (Op Amps) > Precision Op Amps