Datasheet Texas Instruments OPA832IDBVT — 数据表

制造商Texas Instruments
系列OPA832
零件号OPA832IDBVT
Datasheet Texas Instruments OPA832IDBVT

低功耗,单电源,固定增益视频缓冲放大器5-SOT-23 -40至85

数据表

Low-Power, Single-Supply, Fixed-Gain Video Buffer Amplifier datasheet
PDF, 750 Kb, 修订版: E, 档案已发布: Aug 28, 2008
从文件中提取

价格

状态

Lifecycle StatusActive (Recommended for new designs)
Manufacture's Sample AvailabilityNo

打包

Pin5
Package TypeDBV
Industry STD TermSOT-23
JEDEC CodeR-PDSO-G
Package QTY250
CarrierSMALL T&R
Device MarkingA74
Width (mm)1.6
Length (mm)2.9
Thickness (mm)1.2
Pitch (mm).95
Max Height (mm)1.45
Mechanical Data下载

参数化

2nd Harmonic64 dBc
3rd Harmonic57 dBc
@ MHz5
Acl, min spec gain1 V/V
Additional FeaturesDecompensated
ArchitectureBipolar,Voltage FB
BW @ Acl80 MHz
CMRR(Min)72 dB
CMRR(Typ)72 dB
GBW(Typ)160 MHz
Input Bias Current(Max)10000000 pA
Iq per channel(Max)4.7 mA
Iq per channel(Typ)4.25 mA
Number of Channels1
Offset Drift(Typ)20 uV/C
Operating Temperature Range-40 to 85 C
Output Current(Typ)80 mA
Package GroupSOT-23
Package Size: mm2:W x L5SOT-23: 8 mm2: 2.8 x 2.9(SOT-23) PKG
Rail-to-RailIn to V-,Out
RatingCatalog
Slew Rate(Typ)350 V/us
Total Supply Voltage(Max)11 +5V=5, +/-5V=10
Total Supply Voltage(Min)2.8 +5V=5, +/-5V=10
Vn at 1kHz(Typ)9.2 nV/rtHz
Vn at Flatband(Typ)9.3 nV/rtHz
Vos (Offset Voltage @ 25C)(Max)7 mV

生态计划

RoHSCompliant

设计套件和评估模块

  • Evaluation Modules & Boards: DEM-OPA-SOT-1A
    Unpopulated PCB Compatible w/High Speed, Wide Bandwidth Op Amps in SOT(DBV) Pkg
    Lifecycle Status: Active (Recommended for new designs)
  • Evaluation Modules & Boards: DEM-OPA-SO-1A
    DEM-OPA-SO-1A Unpopulated PCB Compatible w/High Speed Wide Bandwidth Op Amps in 8-lead SOIC (D) Pkg
    Lifecycle Status: Active (Recommended for new designs)

应用须知

  • RLC Filter Design for ADC Interface Applications (Rev. A)
    PDF, 299 Kb, 修订版: A, 档案已发布: May 13, 2015
    As high performance Analog-to-Digital Converters (ADCs) continue to improve in their performance, the last stage interface from the final amplifier into the converter inputs becomes a critical element in the system design if the full converter dynamic range is desired. This application note describes the performance and design equations for a simple passive 2nd-order filter used successfully in AD
  • Measuring Board Parasitics in High-Speed Analog Design
    PDF, 134 Kb, 档案已发布: Jul 7, 2003
    Successful circuit designs using high-speed amplifiers can depend upon understanding and identifying parasitic PCB components. Simulating a design while including PCB parasitics can protect against unpleasant production surprises. This application report discusses an easy method for measuring parasitic components in a prototype or final PC board design by using a standard oscilloscope and low freq
  • Noise Analysis for High Speed Op Amps (Rev. A)
    PDF, 256 Kb, 修订版: A, 档案已发布: Jan 17, 2005
    As system bandwidths have increased an accurate estimate of the noise contribution for each element in the signal channel has become increasingly important. Many designers are not however particularly comfortable with the calculations required to predict the total noise for an op amp or in the conversions between the different descriptions of noise. Considerable inconsistency between manufactu

模型线

系列: OPA832 (4)

制造商分类

  • Semiconductors > Amplifiers > Operational Amplifiers (Op Amps) > High-Speed Op Amps (>=50MHz)