Datasheet MAX4410EUD+ - Maxim Audio Amplifiers 80 mW DirectDrive Stereo Headphone Amp — 数据表

Maxim MAX4410EUD+

Part Number: MAX4410EUD+

详细说明

Manufacturer: Maxim

Description: Audio Amplifiers 80 mW DirectDrive Stereo Headphone Amp

datasheetDownload DataSheet

Docket:
19-2386; Rev 2; 10/02
80mW, DirectDrive Stereo Headphone Driver with Shutdown
General Description
The MAX4410 stereo headphone driver is designed for portable equipment where board space is at a premium.

The MAX4410 uses a unique, patented, DirectDrive architecture to produce a ground-referenced output from a single supply, eliminating the need for large DC-blocking capacitors, saving cost, board space, and component height. The MAX4410 delivers up to 80mW per channel into a 16 load and has low 0.003% THD + N. A high powersupply rejection ratio (90dB at 1kHz) allows this device to operate from noisy digital supplies without an additional linear regulator. The MAX4410 includes ±8kV ESD protection on the headphone outputs. Comprehensive clickand-pop circuitry suppresses audible clicks and pops on startup and shutdown. Independent left/right, low-power shutdown controls make it possible to optimize power savings in mixed mode, mono/stereo applications. The MAX4410 operates from a single

Specifications:

  • Audio Load Resistance: 16 Ohm
  • Input Offset Voltage: 0.5 mV
  • Maximum Power Dissipation: 727 mW
  • Mounting Style: SMD/SMT
  • Operating Supply Voltage: 1.8 V to 3.6 V
  • Operating Temperature Range: - 40 C to + 85 C
  • Output Power: 80 mW
  • Output Type: 2-Channel Headphone Driver
  • Package / Case: TSSOP-14
  • Packaging Type: Tube
  • Product: Audio Line Drivers / Receivers
  • Supply Current: 7 mA
  • THD plus Noise: 0.003 %
  • RoHS: Yes