72V Programmable Brushless Motor Controller with 16bit CPU E523.52 PRELIMINARY INFORMATION – Jan 18, 2017 Features Brief functional description Supply voltage range from 12V to 72V, operational The E523.52 is a programmable, high-voltage brushless
motor controller for 24V.48V automotive applications,
industrial applications and commercial vehicles. It integrates 3 half-bridge drivers, a 11V step down converter,
two linear regulators, and a 16bit RISC microcontroller
with 32kB Flash.
The DC-DC converter efficiently provides 11V for the six
gate drivers, the internal linear regulators, and other
loads such as external Hall sensors. Up to 9 configurable IO pins facilitate interfacing with the application and
the outside world. All IOs can be sampled by a 12bit,
1MS/s ADC with direct memory access.
Three self advancing PWM generators with integrated
dead time can implement various wave-forms. Fully
integrated back-EMF channels allow sensor-less commutation. Automatic ADC triggering allows programming
of complex commutation algorithms. The memory can
be divided into protected and field programmable areas.
Internal temperature monitoring and a thermally efficient
36 Pin QFN package enable the driver section to operate close to its maximum junction temperature of 150В°C. down to 7V
11V, 100mA high efficiency DC-DC converter for gate
supply and other loads
Three complementary 200mA gate drivers with programmable dead time and protection features
Integrated automotive 16Bit RISC processor with and
hardware MAC and divider units 32kByte Flash with ECC error protection 16kByte ROM 4 kByte SRAM, parity protected
Self advancing half bridge PWM generators autonomously generate various commutation waveforms …