Datasheet Texas Instruments DAC5652IPFB — 数据表
| 制造商 | Texas Instruments |
| 系列 | DAC5652 |
| 零件号 | DAC5652IPFB |
双通道，10位，275MSPS数模转换器（DAC）48-TQFP -40至85
数据表
Dual 10 Bit 275 MSPS Digital-to-Analog Converter datasheet
PDF, 675 Kb, 修订版: C, 档案已发布: Nov 29, 2010
从文件中提取
价格
状态
| Lifecycle Status | Active (Recommended for new designs) |
| Manufacture's Sample Availability | No |
打包
| Pin | 48 |
| Package Type | PFB |
| Industry STD Term | TQFP |
| JEDEC Code | S-PQFP-G |
| Package QTY | 250 |
| Carrier | JEDEC TRAY (5+1) |
| Device Marking | DAC5652I |
| Width (mm) | 7 |
| Length (mm) | 7 |
| Thickness (mm) | 1 |
| Pitch (mm) | .5 |
| Max Height (mm) | 1.2 |
| Mechanical Data | 下载 |
参数化
| Architecture | Current Source |
| DAC Channels | 2 |
| Interface | Parallel CMOS |
| Interpolation | 1x |
| Operating Temperature Range | -40 to 85 C |
| Package Group | TQFP |
| Package Size: mm2:W x L | 48TQFP: 81 mm2: 9 x 9(TQFP) PKG |
| Power Consumption(Typ) | 290 mW |
| Rating | Catalog |
| Resolution | 10 Bits |
| SFDR | 80 dB |
| Sample / Update Rate | 275 MSPS |
生态计划
| RoHS | Compliant |
设计套件和评估模块
- Evaluation Modules & Boards: DAC5652EVM
DAC5652 Dual-Channel, 10-Bit, 275-MSPS Digital-to-Analog Converter Evaluation Module
Lifecycle Status: Active (Recommended for new designs) - Evaluation Modules & Boards: TSW2200EVM
TSW2200 Low-Cost Portable Power Supply Evaluation Module
Lifecycle Status: Active (Recommended for new designs)
应用须知
- Passive Terminations for Current Output DACsPDF, 244 Kb, 档案已发布: Nov 10, 2008
The correct implementation of the high-speed DAC output termination is critical to achieving the best possible performance. The typical application involves choosing the correct network to create the necessary dc bias levels and correct effective impedance load to keep the output voltage within the compliance levels. This ensures that the maximum output signal amplitude and optimum ac performance - High Speed Digital-to-Analog Converters Basics (Rev. A)PDF, 829 Kb, 修订版: A, 档案已发布: Oct 23, 2012
- Wideband Complementary Current Output DAC Single-Ended InterfacePDF, 597 Kb, 档案已发布: Jun 21, 2005
High-speed digital-to-analog converters (DACs) most often use a transformer-coupled output stage. In applications where this configuration is not practical, a single op ampdifferential to single-ended stage has often been used. This application note steps through the exact design equations required to achieve gain matching from each output as well as a matched input impedance to each of the DA
模型线
系列: DAC5652 (2)
- DAC5652IPFB DAC5652IPFBR
制造商分类
- Semiconductors > Data Converters > Digital-to-Analog Converters (DACs) > High Speed DACs (>10MSPS)