Datasheet Texas Instruments INA117P — 数据表

制造商	Texas Instruments
系列	INA117
零件号	INA117P

高共模电压差动放大器8-PDIP

数据表

下载

PDF, 312 Kb, 修订版: A, 档案已发布: Nov 26, 2000

从文件中提取

价格

状态

Lifecycle Status	Active (Recommended for new designs)
Manufacture's Sample Availability	No

打包

Pin	8
Package Type	P
Industry STD Term	PDIP
JEDEC Code	R-PDIP-T
Package QTY	50
Carrier	TUBE
Device Marking	INA117P
Width (mm)	6.35
Length (mm)	9.81
Thickness (mm)	3.9
Pitch (mm)	2.54
Max Height (mm)	5.08
Mechanical Data	下载

参数化

CMRR(Min)	86 dB
Common Mode Input High(Max)	200 V
Common Mode Input High(Min)	200 V
Common Mode Input Low(Min)	-200 V
Gain	1 V/V
Gain Drift(Max)	10 ppm/C
Gain Error (+/-)(Max)	0.05 %
Gain(Max)	1 V/V
Gain(Min)	1 V/V
Input Offset (+/-)(Max)	1000 uV
Iq(Typ)	2 mA
Number of Channels	1
Operating Temperature Range	-40 to 85 C
Package Group	PDIP
Package Size: mm2:W x L	See datasheet (PDIP) PKG
Rating	Catalog
Slew Rate(Typ)	2.6 V/us
Small Signal Bandwidth(Typ)	0.2 MHz
Vs(Max)	36 V
Vs(Min)	10 V

生态计划

RoHS

Compliant

应用须知

下载
Input Filtering The INA117 В±200V Difference Amplifier
PDF, 48 Kb, 档案已发布: Sep 27, 2000
Many customers have asked how to add input filtering to the INA117. Since the INA117 is rated for В±200V input voltage (В±500V without damage), it is commonly used in environments with very high input noise or with high-voltage input transients. This bulletin shows how to connect input filters, discusses the errors they can add, and shows how to eliminate the errors.
下载
В±200V Difference Amplifier with Common-Mode Voltage Monitor
PDF, 32 Kb, 档案已发布: Sep 27, 2000
The INA117 is a monolithic difference amplifier with the unique ability to accept up to В±200V common-mode input signals while operating on standard В±15V power supplies. Using on-chip high-voltage resistor dividers, the INA117 rejects common-mode signals up to В±200V and translates a 0V to В±10V differential input signal to a 0V to В±10V ground-referenced output sign
下载
Increasing INA117 Differential Input Range
PDF, 30 Kb, 档案已发布: Sep 27, 2000
The INA117 is a monolithic difference amplifier with the unique ability to accept up to В±200V common-mode input signals while operating on standard В±15V power supplies. Because the gain of the INA117 is set at 1V/V, and because the output would saturate into the rails at about В±12V, the maximum specified differential input range is В±10V.
下载
Extending the Common-Mode Range of Difference Amplifiers
PDF, 49 Kb, 档案已发布: Sep 27, 2000
Extending the common-mode range of difference amplifiers allows their use in a wider variety of reduced power-supply applications. The INA117 has a specified common-mode input range of В±200V when operating on standard В±15V power supplies. At power-supply voltages above В±13V, the INA117 input range is limited to В±200V by the power capabilities of its internal input resis
下载
AC Coupling Instrumentation and Difference Amplifiers
PDF, 38 Kb, 档案已发布: Sep 27, 2000
The need to glean AC signals from DC in the presence of common-mode noise frequently occurs in signal conditioning applications. AC coupling to an instrumentation amplifier (IA) or difference amplifier can be used to accurately extract the AC signal while rejecting DC and common-mode noise.
下载
Implementation and Applications of Current Sources and Current Receivers
PDF, 427 Kb, 档案已发布: Sep 27, 2000
This application guide is intended as a source book for the design and application of: Current sourcesCurrent sinksFloating current sourcesVoltage-to-current converters(transconductance amplifiers)Current-to-current converters (current mirrors)Current-to-voltage converters(transimpedance amplifiers)
下载
Offset Correction Methods: Laser Trim, e-Trim, and Chopper (Rev. A)
PDF, 795 Kb, 修订版: A, 档案已发布: Jul 20, 2017

模型线

系列: INA117 (16)

INA117AM INA117AM4 INA117BM INA117BM-22 INA117BM-3 INA117BM-33 INA117BM1 INA117KU INA117KU/2K5 INA117KU/2K5G4 INA117KUG4 INA117P INA117P-BI INA117PG4 INA117SM INA117SMQ

制造商分类

Semiconductors > Amplifiers > Difference Amplifiers