Datasheet Texas Instruments OPA129P — 数据表
制造商 | Texas Instruments |
系列 | OPA129 |
零件号 | OPA129P |
超低偏置电流差动运算放大器8-PDIP
数据表
Ultra-Low Bias Current DifetВ® Operational Amplifier datasheet
PDF, 587 Kb, 修订版: A, 档案已发布: Apr 28, 2007
从文件中提取
价格
状态
Lifecycle Status | Obsolete (Manufacturer has discontinued the production of the device) |
Manufacture's Sample Availability | No |
打包
Pin | 8 |
Package Type | P |
Industry STD Term | PDIP |
JEDEC Code | R-PDIP-T |
Width (mm) | 6.35 |
Length (mm) | 9.81 |
Thickness (mm) | 3.9 |
Pitch (mm) | 2.54 |
Max Height (mm) | 5.08 |
Mechanical Data | 下载 |
替代品
Replacement | OPA129U |
Replacement Code | F |
参数化
Additional Features | N/A |
Approx. Price (US$) | 3.36 | 1ku |
Architecture | FET |
CMRR(Min)(dB) | 80 |
CMRR(Typ)(dB) | 118 |
GBW(Typ)(MHz) | 1 |
Input Bias Current(Max)(pA) | 0.1 |
Iq per channel(Max)(mA) | 1.8 |
Iq per channel(Typ)(mA) | 1.2 |
Number of Channels(#) | 1 |
Offset Drift(Typ)(uV/C) | 3 |
Operating Temperature Range(C) | -40 to 125 |
Output Current(Typ)(mA) | 35 |
Package Group | SOIC |
Package Size: mm2:W x L (PKG) | See datasheet (PDIP) |
Rail-to-Rail | No |
Rating | Catalog |
Slew Rate(Typ)(V/us) | 2.5 |
Total Supply Voltage(Max)(+5V=5, +/-5V=10) | 36 |
Total Supply Voltage(Min)(+5V=5, +/-5V=10) | 10 |
Vn at 1kHz(Typ)(nV/rtHz) | 17 |
Vos (Offset Voltage @ 25C)(Max)(mV) | 2 |
生态计划
RoHS | Not Compliant |
Pb Free | No |
应用须知
- Designing Photodiode Amplifier Circuits with OPA128PDF, 76 Kb, 档案已发布: Oct 2, 2000
The OPA128 ultra-low bias current operational amplifier achieves its 75fA maximum bias current without compromise. Using standard design techniques, serious performance trade-offs were required which sacrificed overall amplifier performance in order to reach femtoamp (fA = 10-15A) bias currents. - Diode-Connected FET Protects Op AmpsPDF, 49 Kb, 档案已发布: Oct 2, 2000
Providing input-overload protection for sensitive measurement circuits proves difficult when you must not degrade the circuits? performance in the process. It?s an especially tricky problem when you?re measuring a material?s dielectric properties. In such an application, an ultra-low input bias current op amp serves as a current integrator to measure a dielectric?s response to a 100V step. - Compensate Transimpedance Amplifiers Intuitively (Rev. A)PDF, 69 Kb, 修订版: A, 档案已发布: Mar 30, 2005
Transimpedance amplifiers are used to convert low-level photodiode currents to usable voltage signals. All too often, the amplifiers have to be empirically compensated to operate properly. The problem can be easily understood if one looks at all the elements involved. - Tuning in AmplifiersPDF, 44 Kb, 档案已发布: Oct 2, 2000
Have you ever had the experience of designing an analog gain block with an amplifier that is specified to be unity gain stable only to find that it is oscillating out of control in your circuit? Or have you ever replaced a stable voltage feedback amplifier with a current feedback amplifier to find that the current feedback amplifier immediately oscillates when placed in the amplifier socket? Oscil - Single-Supply Operation of Operational AmplifiersPDF, 77 Kb, 档案已发布: Oct 2, 2000
Operation of op amps from single supply voltages is useful when negative supply voltages are not available. Furthermore, certain applications using high voltage and high current op amps can derive important benefits from single supply operation. - Op Amp Performance AnalysisPDF, 76 Kb, 档案已发布: Oct 2, 2000
This bulletin reflects the analysis power gained through knowledge of an op amp circuit's feedback factor. Feedback dictates the performance of an op amp both in function and in quality. The major specifications of the amplifier descibe an open-loop device awaiting feedback direction of the end circuit's function. Just how well the amplifier performs the function reflects through the feedback inte
模型线
系列: OPA129 (8)
制造商分类
- Semiconductors > Amplifiers > Operational Amplifiers (Op Amps) > Precision Op Amps