Datasheet Texas Instruments TPS2300IPWG4 — 数据表
| 制造商 | Texas Instruments |
| 系列 | TPS2300 |
| 零件号 | TPS2300IPWG4 |
具有独立通道断路和电源良好报告的3-13V双路热插拔IC，低电平有效使能20-TSSOP -40至85
数据表
Dual Hot-Swap Power Controllers w/Independent Circuit Breaker & Power-Good Rep datasheet
PDF, 506 Kb, 修订版: H, 档案已发布: May 10, 2013
从文件中提取
状态
| Lifecycle Status | Active (Recommended for new designs) |
| Manufacture's Sample Availability | Yes |
打包
| Pin | 20 |
| Package Type | PW |
| Industry STD Term | TSSOP |
| JEDEC Code | R-PDSO-G |
| Package QTY | 70 |
| Carrier | TUBE |
| Device Marking | TPS2300I |
| Width (mm) | 4.4 |
| Length (mm) | 6.5 |
| Thickness (mm) | 1 |
| Pitch (mm) | .65 |
| Max Height (mm) | 1.2 |
| Mechanical Data | 下载 |
参数化
| Channel(s) Controlled | 2 |
| Current Limit Accuracy | Adjustable |
| Current Limit Function Enabled | Always |
| Current Limit Threshold(Typ) | Adjustable Ext FET=mV |
| Current Measurement Accuracy | N/A % |
| Design Support | Calculation Tool,EVM |
| Fault Response | Latch Off |
| ON_OFF Control Input | EN/ s |
| Operating Temperature Range | -40 to 85 C |
| Package Group | TSSOP |
| Package Size: mm2:W x L | 20TSSOP: 42 mm2: 6.4 x 6.5(TSSOP) PKG |
| Rating | Catalog |
| Status Output | FLT/,PG |
| Vabsmax_cont | 15 V |
| Vin(Max) | 13 V |
| Vin(Min) | 3 V |
生态计划
| RoHS | Compliant |
设计套件和评估模块
- Evaluation Modules & Boards: TPS2301EVM-153
TPS23XX Hot Swap Power Controllers Evaluation Module
Lifecycle Status: Active (Recommended for new designs) - Evaluation Modules & Boards: TPS2330EVM-184
TPS2330 48-V Telecom Hot Swap Evaluation Module and Interface Card
Lifecycle Status: Active (Recommended for new designs)
应用须知
- VREG Considerations in a 5V and 3.3V System Using the TPS2300/01/10/11PDF, 537 Kb, 档案已发布: Mar 31, 2006
This application report illustrates the use of the TPS2300/2301/2310/2311 for a common dual 5-V/3.3-V application. The TPS2300/2301/2310/2311 are dual-channel, hot-swap controllers that eliminate high-frequency, hot-plug or hot-removal transients, reduce inrush current, and provide overcurrent protection. The TPS2300 family can be easily configured for 5-V/3.3-V application providing a unified inp - Low Voltage (0V-5.5V) Hot-Swap Application Using TPS2300/2301PDF, 141 Kb, 档案已发布: Nov 1, 2001
This application note illustrates the use of the TPS2300/2301 for low voltage applications. The TPS2300/2301/2310/2311/2320/2321 are dual-channel hot-swap controllers that eliminate high-frequency hot-plug or hot-removal transients, reduce inrush current, and provide overcurrent protection. The TPS2300/2301/2310/2311/2320/2321 can be easily configured for low voltage applications and are capable o - Step-By-Step Design Approach of TPS2300/01/10/11/20/21/30/31 Hotswap ControllersPDF, 169 Kb, 档案已发布: May 23, 2003
The TPS2300/01/10/11/20/21/30/31 hotswap controllers allow safe board insertion and removal from a live backplane. With the current-limit-setting resistor (RSET), the current limit can be set much more easily than other hotswap controllers. This report uses a simple step-by-step design approach to select the essential components and parameters for typical hotswap applications. By following the des - Power Management Solutions for Infiniband (SM) I/O ModulesPDF, 75 Kb, 档案已发布: Oct 20, 2000
InfiniBand, a scalable, modular, channel-based, switched-fabric architecture, is defined for the connection of servers with servers and with storage and networking devices. Because appropriate power management is essential for quality implementations, this report presents straightforward solutions for both high-power and low-power applications as required by the InfiniBand specification.
模型线
系列: TPS2300 (4)
- TPS2300IPW TPS2300IPWG4 TPS2300IPWR TPS2300IPWRG4
制造商分类
- Semiconductors > Power Management > Protection, Monitoring and Hot Swap > Hot Swap Controllers (Positive, -48V)