Datasheet Intersil HS-565BEH — 数据表

DATASHEET
HS-565BRH, HS-565BEH FN4607
Rev 4.00
May 7, 2012 Radiation Hardened High Speed, Monolithic Digital-to-Analog Converter Features The HS-565BRH, HS-565BEH are fast, radiation hardened
12-bit current output, digital-to-analog converters. This part
replaces the HS-565ARH, which is no longer available. The
monolithic chips include a precision voltage reference,
thin-film R-2R ladder, reference control amplifier and twelve
high-speed bipolar current switches. Electrically Screened to SMD # 5962-96755 QML Qualified per MIL-PRF-38535 Requirements Total Dose 100 krad (Si) (Max) DAC and Reference on a Single Chip The Intersil Dielectric Isolation process provides latch-up free
operation while minimizing stray capacitance and leakage
currents, to produce an excellent combination of speed and
accuracy. Also, ground currents are minimized to produce a
low and constant current through the ground terminal, which
reduces error due to code-dependent ground currents. Pin Compatible with AD-565A and HI-565A Very High Speed: Settles to 0.50 LSB in 500ns Max Monotonicity Guaranteed Over Temperature 0.50 LSB Max Nonlinearity Guaranteed Over Temperature HS-565BRH, HS-565BEH die are laser trimmed for a
maximum integral nonlinearity error ofпЂ п‚±0.25 LSB at +25В°C. In
addition, the low noise buried zener reference is trimmed both
for absolute value and minimum temperature coefficient. Low Gain Drift
(Max., DAC Plus Reference) 50ppm/В°C Specifications for Rad Hard QML devices are controlled by the
Defense Supply Center in Columbus (DSCC). The SMD
numbers listed here must be used when ordering. Applications Detailed Electrical Specifications for these devices are
contained in SMD 5962-96755. A “hot-link” is provided on our
website for downloading. Precision Instrumentation п‚±0.75 LSB Accuracy Guaranteed Over Temperature
(п‚±0.125 LSB Typical at +25В°C) High Speed A/D Converters Signal Reconstruction BIP. …