Datasheet Intersil ISL78310ARAJZ-T — 数据表

DATASHEET
ISL78310 FN7810
Rev 2.00
November 7, 2014 High Performance 1A LDO
The ISL78310 is a low dropout voltage, high-current, single
output LDO specified for 1A output current. This part operates
from input voltages down to 2.2V and up to 6V. The part offers
fixed and external resistor adjustable output voltages from
0.8V to 5V. Custom voltage options are available upon request. Features For applications that desire to set the in-rush current to less
than the current limit of the part, or for applications that
require turn-on time control, an external capacitor can be
placed on the soft-start pin for maximum control. A supplyindependent ENABLE signal allows the part to be placed into a
low quiescent current shutdown mode. Sub-micron CMOS
process is used for this product family to deliver best-in-class
analog performance and overall value. В±0.2% initial VOUT accuracy This CMOS LDO consumes significant lower quiescent (ground
pin) current as a function of load over bipolar LDOs, which
translates into higher efficiency and packages with smaller
footprints. Quiescent current is optimized to achieve a very fast
load transient response. Supply-independent 1V enable input threshold The ISL78310 is AEC-Q100 rated. The ISL78310 is rated for
the automotive temperature range (-40В°C to +125В°C). Any cap stable with minimum 10ВµF ceramic 2.2V to 6V input supply 130mV dropout voltage typical (at 1A) Fast load transient response Adjustable in-rush current limiting 58dB typical PSRR 63ВµVRMS output noise at VOUT = 1.8V Power-good feature 500mV feedback voltage Short-circuit current protection 1A peak reverse current Over-temperature shutdown В±1.8% guaranteed VOUT accuracy for junction temperature
range from -40В°C to +125В°C Applications Available in a 10 Lead DFN package Core & I/O power Pb-free (RoHS compliant) Camera modules AEC-Q100 qualified Post regulation of switched supplies Radio systems Infotainment systems Pin Configuration
ISL78310
(10 LD 3x3 DFN) …