DATASHEET
CD22M3494 FN2793
Rev 8.00
May 29, 2014 16 x 8 x 1 BiMOS-E Crosspoint Switch
The Intersil CD22M3494 is an array of 128 analog switches
capable of handling signals from DC to video. Because of
the switch structure, input signals may swing through the
total supply voltage range, VDD to VEE. Each of the 128
switches may be addressed via the ADDRESS input to the 7
to 128 line decoder. The state of the addressed switch is
established by the signal to the DATA input. A low or zero
input will open the switch, while a high logic level or a one
will result in closure of the addressed switch when the
STROBE input goes high from its normally low state. Any
number or combination of connections may be active at one
time. Each connection, however, must be made or broken
individually in the manner previously described. All switches
may be reset by taking the RESET input from a zero state to
a one state and then returning it to its normal low state. Features CS allows crosspoint array to be cascaded for matrix
expansion. Pb-Free (RoHS Compliant) 128 Analog Switches Low rON Guaranteed rON Matching Analog Signal Input Voltage Equal to the Supply Voltage Wide Operating Voltage 4V to 15V Parallel Input Addressing High Latch-Up Current 50mA (Min) Very Low Crosstalk Pin and Functionally Compatible with the Following Types:
SGS M3494 and Mitel MT8816 Applications PBX Systems Instrumentation Analog and Digital Multiplexers Video Switching Networks Block Diagram
CS STROBE AX0
AX1 …