Datasheet Microchip MCP48FEB11-E/UN — 数据表

MCP48FEBXX
8-/10-/12-Bit Single/Dual Voltage Output Nonvolatile
Digital-to-Analog Converters with SPI Interface
Features
• Operating Voltage Range:
-2.7V to 5.5V -full specifications
-1.8V to 2.7V -reduced device specifications
• Output Voltage Resolutions:
-8-bit: MCP48FEB0X (256 Steps)
-10-bit: MCP48FEB1X (1024 Steps)
-12-bit: MCP48FEB2X (4096 Steps)
• Rail-to-Rail Output
• Fast Settling Time of 7.8 µs (typical)
• DAC Voltage Reference Source Options:
-Device VDD
-External VREF pin (buffered or unbuffered)
-Internal Band Gap (1.22V typical)
• Output Gain Options:
-Unity (1x)
-2x
• Nonvolatile Memory (EEPROM):
-User-programmed Power-on Reset
(POR)/Brown-out Reset (BOR) output …

MCP48FXBXX
Typical Performance Curves
1.0 TYPICAL PERFORMANCE CURVES Note 1: The following performance graphs are for the devices that are documented in the MCP48FEBXX data
sheet (DS-20005429). This document allows the MCP48FEBXX data sheet’s functional description to be
in PDF format with a file size smaller than the 10 MB limit of many email file servers.
The graphs and tables provided following this note are a statistical summary based on a limited number of
samples and are provided for informational purposes only. The performance characteristics listed herein
are not tested or guaranteed. In some graphs or tables, the data presented may be outside the specified
operating range (e.g., outside specified power supply range) and therefore outside the warranted range.
2: For quick indexing of Characterization Graphs, expand the PDF bookmarks. Graphs related to all devices
(IDD, IPD, VIH, VIL, VOH, VOL, VIHH, and VOUT drive) are before the device VOUT linearity graphs (Total
Unadjusted Error, INL, and DNL).
Note: Unless otherwise indicated, TA = +25°C, VDD = 5.5V. FIGURE 1-1:
Average Device Supply
Active
Current
(IDDA)
(at
5.5V
and
FSCK = 20 MHz) vs. Temperature and DAC
Reference Voltage Mode. FIGURE 1-3:
Average Device Supply …