PIC32MM0064GPL036 FAMILY
32-Bit Flash Microcontroller with MIPS32В® microAptivв„ў UC Core
with Low Power and Low Pin Count
Operating Conditions Peripheral Features 2.0V to 3.6V, -40ВєC to +85ВєC, DC to 25 MHz Atomic Set, Clear and Invert Operation on Select
Peripheral Registers High-Current Sink/Source 11 mA/16 mA on All Ports Independent, Low-Power 32 kHz Timer Oscillator Two 4-Wire SPI modules (up to 25 Mbps):
-16-byte FIFO
-I2S mode Two UARTs:
-RS-232, RS-485 and LIN/J2602 support
-IrDAВ® with on-chip hardware encoder and decoder External Edge and Level Change Interrupt on All Ports CRC module Hardware Real-Time Clock and Calendar (RTCC) Up to 20 Peripheral Pin Select (PPS) Remappable Pins Seven Total 16-Bit Timers:
-Timer1: Dedicated 16-bit timer/counter
-Two additional 16-bit timers in each MCCP and SCCP
module Capture/Compare/PWM/Timer modules:
-Two 16-bit timers or one 32-bit timer in each module
-PWM resolution down to 21 ns
-One Multiple Output (MCCP) module:
-Flexible configuration as PWM, input capture, output
compare or timers
-Six PWM outputs
-Programmable dead time
-Auto-shutdown
-Two Single Output (SCCP) modules:
-Flexible configuration as PWM, input capture, output
compare or timers …