Datasheet Microchip PIC16LF1713T-I/MV — 数据表

PIC16(L)F1713/6
Cost Effective 8-Bit Intelligent Analog Flash Microcontrollers
Description:
PIC16(L)F1713/6 microcontrollers combine Intelligent Analog integration with low cost and extreme low power (XLP) to
suit a variety of general purpose applications. These 28-pin devices deliver on-chip op amps, Core Independent Peripherals (CLC, NCO and COG), Peripheral Pin Select and Zero-Cross Detect, providing for increased design flexibility. Core Features: Digital Peripherals: C Compiler Optimized RISC Architecture Only 49 Instructions Operating Speed:
-0-32 MHz clock input
-125 ns minimum instruction cycle Interrupt Capability 16-Level Deep Hardware Stack Up to Four 8-bit Timers One 16-bit Timer Power-on Reset (POR) Power-up Timer (PWRT) Low-Power Brown-out Reset (LPBOR) Programmable Watchdog Timer (WDT) up to
256s Programmable Code Protection Configurable Logic Cell (CLC):
-Integrated combinational and sequential logic Complementary Output Generator (COG):
-Rising/falling edge dead-band control/
blanking Numerically Controlled Oscillator (NCO):
-Generates true linear frequency control and
increased frequency resolution
-Input Clock: 0Hz < FNCO < 32 MHz
-Resolution: FNCO/220 Capture/Compare/PWM (CCP) module PWM: Two 10-bit Pulse-Width Modulators Serial Communications:
-SPI, I2C, RS-232, RS-485, LIN compatible
-Auto-Baud Detect, auto-wake-up on start Up to 35 I/O Pins and One Input Pin:
-Individually programmable pull-ups
-Slew rate control
-Interrupt-on-change with edge-select Peripheral Pin Select (PPS):
-Enables pin mapping of digital I/O Memory: Up to 8 Kwords Flash Program Memory
Up to 1024 Bytes Data SRAM Memory
Direct, Indirect and Relative Addressing modes …