Datasheet Microchip ATSAMV71Q21B-CB — 数据表

SAM V70
Atmel | SMART ARM-based Flash MCU
DATASHEET Introduction
AtmelВ® | SMART SAM V70 is a high-performance Flash microcontroller (MCU)
based on the 32-bit ARMВ® CortexВ®-M7 RISC (5.04 CoreMark/MHz) processor
with floating point unit (FPU). Designed for Automotive applications, the SAM V70
has been developed and manufactured according to the most stringent
requirements of the international standard ISO-TS-16949. The device operates at
a maximum speed of 300 MHz, features up to 1024 Kbytes of Flash, dual 16Kbyte cache memory, up to 384 Kbytes of SRAM and is available in 64-, 100-and
144-pin packages.
The Atmel | SMART SAM V70 offers an extensive peripheral set, including dual
CAN-FD, High-speed USB Host and Device plus PHY, up to 8 UARTs, I2S,
SD/MMC interface, a CMOS camera interface, system control and a 12-bit ADC,
as well as high-performance crypto-processors AES, SHA and TRNG. Features
пЃ¬ Core
М¶ ARM Cortex-M7 running at up to 300 MHz(1)
М¶ 16 Kbytes of ICache and 16 Kbytes of DCache with Error Code Correction
(ECC)
М¶ Single-and double-precision HW Floating Point Unit (FPU)
М¶ Memory Protection Unit (MPU) with 16 zones
М¶ DSP Instructions, ThumbВ®-2 Instruction Set
М¶ Embedded Trace Module (ETM) with instruction trace stream, including Trace
Port Interface Unit (TPIU) пЃ¬ Memories …

SAM V71
Atmel | SMART ARM-based Flash MCU
DATASHEET Introduction
AtmelВ® | SMART SAM V71 is a high-performance Flash microcontroller (MCU)
based on the 32-bit ARMВ® CortexВ®-M7 RISC (5.04 CoreMark/MHz) processor
with floating point unit (FPU). Designed for Automotive applications, the SAM V71
has been developed and manufactured according to the most stringent
requirements of the international standard ISO-TS-16949. The device operates at
a maximum speed of 300 MHz, features up to 2048 Kbytes of Flash, dual 16Kbyte cache memory, up to 384 Kbytes of SRAM and is available in 64-, 100-and
144-pin packages.
The Atmel | SMART SAM V71 offers an extensive peripheral set, including
Ethernet 10/100, dual CAN-FD, High-speed USB Host and Device plus PHY, up
to 8 UARTs, I2S, SD/MMC interface, a CMOS camera interface, system control
and a 12-bit ADC, as well as high-performance crypto-processors AES, SHA and
TRNG. Features
пЃ¬ Core
М¶ ARM Cortex-M7 running at up to 300 MHz(1)
М¶ 16 Kbytes of ICache and 16 Kbytes of DCache with Error Code Correction
(ECC)
М¶ Single-and double-precision HW Floating Point Unit (FPU)
М¶ Memory Protection Unit (MPU) with 16 zones
М¶ DSP Instructions, ThumbВ®-2 Instruction Set
М¶ Embedded Trace Module (ETM) with instruction trace stream, including Trace …