Datasheet Linear Technology LTC1960CUHF#PBF — 数据表

数据表

设计须知

• 下载
  Dual Battery Power Manager Increases Run Time by 12% and Cuts Charge Time in Half &mdash DN277
  PDF, 74 Kb, 档案已发布: Feb 1, 2002
  从文件中提取

  Dual Battery Power Manager Increases Run Time by 12%
  and Cuts Charge Time in Half – Design Note 277
  Mark Gurries Although a multibattery simultaneous charge and discharge system can be more difficult to implement than
  a sequential system, paralleling the charging and discharging dual batteries significantly reduces charge time
  and extends run time. The LTCВ®1960 solves many design
  complexities by placing all of the hard-to-design charge
  and discharge control functions in a single package,
  making implementation of dual battery management
  systems possible for a wide variety of applications. In
  addition to controlling simultaneous battery charging
  and discharging, it controls all PowerPathв„ў switching
  between the two batteries, the wall adapter and the
  equipment’s DC/DC converters, plus it includes many
  circuit protection functions. Figure 1 shows a block
  diagram of a typical application.
  The LTC1960 comprises two controllers: The PowerPath controller manages the delivery of power from the
  WALL
  ADAPTER
  INPUT SYSTEM POWER two batteries and a DC input supply while the charge
  controller manages charging the batteries.
  The heart of the PowerPath controller is the ideal diode
  circuit that allows precise voltage tracking between the
  batteries. The ideal diode circuit uses the same MOSFET …

文章

• 下载
  Monolithic Dual Battery Power Manager Increases Run Time and Decreases Charge Time &mdash LT Journal
  PDF, 78 Kb, 档案已发布: Dec 1, 2001
  从文件中提取

  DESIGN FEATURES Monolithic Dual Battery Power
  Manager Increases Run Time and
  Decreases Charge Time
  by Mark Gurries
  Attractive Features but
  Many portable computers and other Tough to Implement Introduction 12.0 BAT1
  VOLTAGE BATTERY VOLTAGE (V) 11.0 DUAL BAT2
  VOLTAGE 10.0
  9.0 BAT2
  VOLTAGE 8.0 SEQUENTIAL 12.0
  11.0
  10.0 BAT1
  VOLTAGE 9.0 11
  MINUTES 8.0
  0 20 40 60 80 100 120 140 160 180
  TIME (min)
  1960 G12 BATTERY TYPE: 10.8V Li-Ion(MOLTECH NI2020)
  LOAD CURRENT = 3A Figure 1. Comparison of battery discharge
  times for a dual (simultaneous) system and
  for a sequential system 12 How does it work? Figure 1 shows
  how in high current drain applications, paralleling two batteries can
  extend battery discharge time to more
  than twice that of a single battery. …

模型线

制造商分类

• Power Management > Battery Management > Battery Charger IC > Switching Battery Chargers | SMBus/I2C/SPI Controlled Battery Chargers

其他名称:

LTC1960CUHFPBF, LTC1960CUHF PBF