SN74LVC32245
32-BIT BUS TRANSCEIVER
WITH 3-STATE OUTPUTS
www.ti.com SCES343D – OCTOBER 2000 – REVISED APRIL 2005 FEATURES Member of the Texas Instruments Widebus+™
Family
Operates From 1.65 V to 3.6 V
Inputs Accept Voltages to 5.5 V
Max tpd of 4 ns at 3.3 V
Typical VOLP (Output Ground Bounce) < 0.8 V
at VCC = 3.3 V, TA = 25В°C Typical VOHV (Output VOH Undershoot) > 2 V at
VCC = 3.3 V, TA = 25В°C
Ioff Supports Partial-Power-Down Mode
Operation
Supports Mixed-Mode Signal Operation on All
Ports (5-V Input/Output Voltage With
3.3-V VCC) DESCRIPTION/ORDERING INFORMATION
This 32-bit noninverting bus transceiver is designed for 1.65-V to 3.6-V VCC operation.
The SN74LVC32245 is designed for asynchronous communication between data buses. The control-function
implementation minimizes external timing requirements.
This device can be used as four 8-bit transceivers, two 16-bit transceivers, or one 32-bit transceiver. It allows
data transmission from the A bus to the B bus or from the B bus to the A bus, depending on the logic level at the
direction-control (DIR) input. The output-enable (OE) input can be used to disable the device so that the buses
are effectively isolated. …
