Datasheet Texas Instruments MSP430FR5957 — 数据表

制造商Texas Instruments
系列MSP430FR5957
Datasheet Texas Instruments MSP430FR5957

MSP430FR5957 16 MHz超低功耗微控制器,具有32 KB FRAM,1 KB SRAM,33 IO

数据表

MSP430FR59xx Mixed-Signal Microcontrollers datasheet
PDF, 2.6 Mb, 修订版: F, 档案已发布: Mar 9, 2017
从文件中提取

价格

状态

MSP430FR5957IDAMSP430FR5957IDARMSP430FR5957IRHARMSP430FR5957IRHAT
Lifecycle StatusActive (Recommended for new designs)Active (Recommended for new designs)Active (Recommended for new designs)Active (Recommended for new designs)
Manufacture's Sample AvailabilityNoNoNoNo

打包

MSP430FR5957IDAMSP430FR5957IDARMSP430FR5957IRHARMSP430FR5957IRHAT
N1234
Pin38384040
Package TypeDADARHARHA
Industry STD TermTSSOPTSSOPVQFNVQFN
JEDEC CodeR-PDSO-GR-PDSO-GS-PQFP-NS-PQFP-N
Package QTY4020002500250
CarrierTUBELARGE T&RLARGE T&RSMALL T&R
Device MarkingFR5957FR5957FR5957FR5957
Width (mm)6.26.266
Length (mm)12.512.566
Thickness (mm)1.151.15.9.9
Pitch (mm).65.65.5.5
Max Height (mm)1.21.211
Mechanical Data下载下载下载下载

参数化

Parameters / ModelsMSP430FR5957IDA
MSP430FR5957IDA
MSP430FR5957IDAR
MSP430FR5957IDAR
MSP430FR5957IRHAR
MSP430FR5957IRHAR
MSP430FR5957IRHAT
MSP430FR5957IRHAT
ADCADC12 - 14chADC12 - 14chADC12 - 14chADC12 - 14ch
AESAES256AES256AES256AES256
Active Power, uA/MHz101.25101.25101.25101.25
Additional FeaturesReal-Time Clock,Watchdog,Brown Out Reset,IrDA,Temp Sensor,IP ProtectionReal-Time Clock,Watchdog,Brown Out Reset,IrDA,Temp Sensor,IP ProtectionReal-Time Clock,Watchdog,Brown Out Reset,IrDA,Temp Sensor,IP ProtectionReal-Time Clock,Watchdog,Brown Out Reset,IrDA,Temp Sensor,IP Protection
BSLUARTUARTUARTUART
CPUMSP430MSP430MSP430MSP430
Comparators16161616
DMA3333
Featuredfr5fr5fr5fr5
Frequency, MHz16161616
GPIO Pins33333333
I2C1111
Max VCC3.63.63.63.6
Min VCC1.81.81.81.8
Multiplier32x3232x3232x3232x32
Non-volatile Memory, KB32323232
Operating Temperature Range, C-40 to 85-40 to 85-40 to 85-40 to 85
Package GroupTSSOPTSSOPVQFNVQFN
Package Size: mm2:W x L, PKG38TSSOP: 101 mm2: 8.1 x 12.5(TSSOP)38TSSOP: 101 mm2: 8.1 x 12.5(TSSOP)40VQFN: 36 mm2: 6 x 6(VQFN)40VQFN: 36 mm2: 6 x 6(VQFN)
RAM, KB1111
RatingCatalogCatalogCatalogCatalog
SPI3333
Security EnablerCryptographic acceleration,Debug security,Physical security,Secure FW and SW update,Software IP protectionCryptographic acceleration,Debug security,Physical security,Secure FW and SW update,Software IP protectionCryptographic acceleration,Debug security,Physical security,Secure FW and SW update,Software IP protectionCryptographic acceleration,Debug security,Physical security,Secure FW and SW update,Software IP protection
Special I/ON/AN/AN/AN/A
Standby Power, LPM3-uA0.50.50.50.5
Timers - 16-bit5555
UART2222
Wakeup Time, us7777

生态计划

MSP430FR5957IDAMSP430FR5957IDARMSP430FR5957IRHARMSP430FR5957IRHAT
RoHSCompliantCompliantCompliantCompliant

应用须知

  • Secure In-Field Firmware Updates for MSP MCUs
    PDF, 223 Kb, 档案已发布: Nov 17, 2015
    In-field firmware update is a feature that is increasingly used in microcontroller-based applications today and important benefits include service and support to products that are already deployed in the field (for example, being able to correct bugs or add new functionalities). As common as in-field firmware updates are in embedded systems, this feature is also commonly exploited by attackers; if
  • Random Number Generation Using MSP430FR59xx and MSP430FR69xx Microcontrollers
    PDF, 113 Kb, 档案已发布: Jan 18, 2017
    Random number generation has a role in a variety of applications, such as cryptography and tamper detection.In digital systems, it becomes difficult to introduce the concept of true randomness as a machine executes code in the sequence it is programed. This introduces the notion of true random number generators (TRNGs) and pseudorandom number generators (PRNGs), also known as deterministic rando
  • Getting Started With EEMBC ULPBench on MSP-EXP430FR5969 (Rev. A)
    PDF, 381 Kb, 修订版: A, 档案已发布: Jan 29, 2015
    This is a getting started guide for obtaining the ULPMarkв„ў-CP score using the Embedded Microprocessor Benchmark Consortium (EEMBC) ULPBench and EnergyMonitor with the MSP430FR5969 microcontroller (MCU). This document uses the MSP-EXP430FR5969 LaunchPad development kit as the target evaluation module (EVM) for performing the benchmark.
  • Migrating From MSP430F4xx Family to MSP430FR58xx/FR59xx/FR68xx/FR69xx Family (Rev. B)
    PDF, 183 Kb, 修订版: B, 档案已发布: Nov 3, 2016
    This application report enables easy migration from MSP430F4xx flash-based MCUs to the MSP430FR58xx/59xx/68xx/69xx family of FRAM-based MCUs. The intent is to highlight key differences between the two families. For more information on the use of the MSP430FR58xx/FR59xx/68xx/69xx devices, see the MSP430FR58xx, MSP430FR59xx, MSP430FR68xx, and MSP430FR69xx Family User's Guide.
  • Designing With the MSP430FR58xx, FR59xx, FR68xx, and FR69xx ADC (Rev. A)
    PDF, 137 Kb, 修订版: A, 档案已发布: Mar 30, 2016
    Designing an application with the analog-to-digital converter (ADC) requires several considerations to optimize for power and performance. This application report discusses the basics of how you would analyze a data sheet and user's guide to design your application. It goes into the fundamentals of how to optimize your design based on the external requirements and available ADC configurations. The
  • MSP430 Advanced Power Optimizations: ULP Advisor SW and EnergyTrace Technology
    PDF, 4.0 Mb, 档案已发布: Jun 9, 2014
    MSP430 microcontrollers are designed specifically for ultra-low-power applications. Features such as multiple low-power modes, instant wakeup, intelligent autonomous peripherals, and much more to enable such ultra-low-power capabilities. Texas Instruments provides valuable tools to help the programmer fully use these benefits and optimize power consumption of the target application. This app
  • MSP430 FRAM Technology – How To and Best Practices
    PDF, 326 Kb, 档案已发布: Jun 23, 2014
    FRAM is a non-volatile memory technology that behaves similar to SRAM while enabling a whole host of new applications, but also changing the way firmware should be designed. This application report outlines the how to and best practices of using FRAM technology in MSP430 from an embedded software development perspective. It discusses how to implement a memory layout according to application-specif
  • MSP430 FRAM Quality and Reliability (Rev. A)
    PDF, 295 Kb, 修订版: A, 档案已发布: May 1, 2014
    FRAM is a nonvolatile embedded memory technology and is known for its ability to be ultra-low power while being the most flexible and easy-to-use universal memory solution available today. This application report is intended to give new FRAM users and those migrating from flash-based applications knowledge on how FRAM meets key quality and reliability requirements such as data retention and endura
  • Migrating from the MSP430F5xx,F6xx Family to the MSP430FR58xx/FR59xx/68xx Family (Rev. D)
    PDF, 151 Kb, 修订版: D, 档案已发布: Nov 3, 2016
    This application report helps enable easy migration from MSP430F5xx and MSP430F6xx flash-based MCUs to the MSP430FR58xx/FR59xx/68xx/69xx FRAM-based MCUs. For the migration guide to MSP430FR57xx, see Migrating From the MSP430F2xx Family to the MSP430FR57xx Family. It covers programming, system, and peripheral considerations when migrating firmware. The intent is to highlight differences between the
  • Migrating from the MSP430F2xx,G2xx Family to the MSP430FR58xx/FR59xx/68xx/69xx (Rev. E)
    PDF, 179 Kb, 修订版: E, 档案已发布: Nov 3, 2016
    This application report enables easy migration from MSP430F2xx flash-based MCUs to the MSP430FR58xx/FR59xx/68xx/69xx family of FRAM-based MCUs. For the migration guide to MSP430FR57xx, see Migrating From the MSP430F2xx Family to the MSP430FR57xx Family. It covers programming, system, and peripheral considerations when migrating firmware. The intent is to highlight key differences between the two f
  • General Oversampling of MSP ADCs for Higher Resolution (Rev. A)
    PDF, 551 Kb, 修订版: A, 档案已发布: Apr 1, 2016
    Multiple MSP ultra-low-power microcontrollers offer analog-to-digital converters (ADCs) to convert physical quantities into digital numbers, a function that is widely used across numerous applications. There are times, however, when a customer design demands a higher resolution than the ADC of the selected MSP can offer. This application report, which is based on the previously-published Oversampl

模型线

制造商分类

  • Semiconductors> Microcontrollers (MCU)> MSP430 ultra-low-power MCUs> MSP430FRxx FRAM