Datasheet Texas Instruments LMP7716-Q1 — 数据表

制造商Texas Instruments
系列LMP7716-Q1
Datasheet Texas Instruments LMP7716-Q1

双精度,17 MHz,低噪声,CMOS输入放大器

数据表

LMP7715/LMP7716/LMP7716Q Single/Dual Prec, 17MHz, Low Noise, CMOS Input Amps datasheet
PDF, 1.1 Mb, 修订版: E, 档案已发布: Mar 25, 2013
从文件中提取

价格

状态

LMP7716QMM/NOPBLMP7716QMME/NOPBLMP7716QMMX/NOPB
Lifecycle StatusActive (Recommended for new designs)Active (Recommended for new designs)Active (Recommended for new designs)
Manufacture's Sample AvailabilityNoNoYes

打包

LMP7716QMM/NOPBLMP7716QMME/NOPBLMP7716QMMX/NOPB
N123
Pin888
Package TypeDGKDGKDGK
Industry STD TermVSSOPVSSOPVSSOP
JEDEC CodeR-PDSO-GR-PDSO-GR-PDSO-G
Package QTY10002503500
CarrierSMALL T&RSMALL T&RLARGE T&R
Device MarkingAR5AAR5AAR5A
Width (mm)333
Length (mm)333
Thickness (mm).97.97.97
Pitch (mm).65.65.65
Max Height (mm)1.071.071.07
Mechanical Data下载下载下载

参数化

Parameters / ModelsLMP7716QMM/NOPB
LMP7716QMM/NOPB
LMP7716QMME/NOPB
LMP7716QMME/NOPB
LMP7716QMMX/NOPB
LMP7716QMMX/NOPB
Additional FeaturesN/AN/AN/A
ArchitectureCMOSCMOSCMOS
CMRR(Min), dB858585
CMRR(Typ), dB100100100
GBW(Typ), MHz171717
Input Bias Current(Max), pA111
Iq per channel(Max), mA1.71.71.7
Iq per channel(Typ), mA1.31.31.3
Number of Channels222
Offset Drift(Typ), uV/C1.751.751.75
Operating Temperature Range, C-40 to 125-40 to 125-40 to 125
Output Current(Typ), mA212121
Package GroupVSSOPVSSOPVSSOP
Package Size: mm2:W x L, PKG8VSSOP: 15 mm2: 4.9 x 3(VSSOP)8VSSOP: 15 mm2: 4.9 x 3(VSSOP)8VSSOP: 15 mm2: 4.9 x 3(VSSOP)
Rail-to-RailIn to V-,OutIn to V-,OutIn to V-,Out
RatingAutomotiveAutomotiveAutomotive
Slew Rate(Typ), V/us9.59.59.5
Total Supply Voltage(Max), +5V=5, +/-5V=105.55.55.5
Total Supply Voltage(Min), +5V=5, +/-5V=101.81.81.8
Vn at 1kHz(Typ), nV/rtHz5.85.85.8
Vos (Offset Voltage @ 25C)(Max), mV0.150.150.15

生态计划

LMP7716QMM/NOPBLMP7716QMME/NOPBLMP7716QMMX/NOPB
RoHSCompliantCompliantCompliant

应用须知

  • AN-1952 Designing with Thermocouples (Rev. A)
    PDF, 72 Kb, 修订版: A, 档案已发布: May 7, 2013
    In 1821 Thomas Seebeck discovered the physical phenomenon that when you join two dissimilar metalson both ends and heat one end, a continuous current is created in the thermoelectric circuit . If the otherend is broken, a voltage can be measured that is proportional to the temperature difference between theheated junction (measuring or hot junction) and the open end (reference or cold ju

模型线

制造商分类

  • Semiconductors> Amplifiers> Operational Amplifiers (Op Amps)> Precision Op Amps