Datasheet Texas Instruments LM3435 — 数据表
| 制造商 | Texas Instruments |
| 系列 | LM3435 |
具有IC控制接口的紧凑型顺序模式RGB LED驱动器
数据表
LM3435 Compact Sequential Mode RGB LED Driver with I 2 C Control Interface datasheet
PDF, 1.7 Mb, 修订版: C, 档案已发布: May 2, 2013
从文件中提取
价格
状态
| LM3435SQ/NOPB | LM3435SQX/NOPB | |
|---|---|---|
| Lifecycle Status | Active (Recommended for new designs) | Active (Recommended for new designs) |
| Manufacture's Sample Availability | Yes | No |
打包
| LM3435SQ/NOPB | LM3435SQX/NOPB | |
|---|---|---|
| N | 1 | 2 |
| Pin | 40 | 40 |
| Package Type | RSB | RSB |
| Industry STD Term | WQFN | WQFN |
| JEDEC Code | S-PQFP-N | S-PQFP-N |
| Package QTY | 1000 | 4500 |
| Carrier | LARGE T&R | LARGE T&R |
| Device Marking | L3435SQ | L3435SQ |
| Width (mm) | 5 | 5 |
| Length (mm) | 5 | 5 |
| Thickness (mm) | .75 | .75 |
| Pitch (mm) | .4 | .4 |
| Max Height (mm) | .8 | .8 |
| Mechanical Data | 下载 | 下载 |
参数化
| Parameters / Models | LM3435SQ/NOPB | LM3435SQX/NOPB |
|---|---|---|
| Dimming Method | Individual RGB PWM | Individual RGB PWM |
| Input Voltage, Type | DC/DC | DC/DC |
| Iout(Max), A | 2 | 2 |
| Iq(Typ), mA | 5 | 5 |
| Operating Temperature Range, C | -40 to 125 | -40 to 125 |
| Package Group | WQFN | WQFN |
| Package Size: mm2:W x L, PKG | 40WQFN: 25 mm2: 5 x 5(WQFN) | 40WQFN: 25 mm2: 5 x 5(WQFN) |
| Power Factor Correction, Min | N/A | N/A |
| Rating | Catalog | Catalog |
| Regulated Outputs | 3 | 3 |
| Special Features | Adjustable Switch Frequency,Enable/Shutdown,Integrated Switch,Soft Start,Thermal Shutdown | Adjustable Switch Frequency,Enable/Shutdown,Integrated Switch,Soft Start,Thermal Shutdown |
| Switching Frequency(Max), kHz | 1000 | 1000 |
| Switching Frequency(Min), kHz | 100 | 100 |
| Topology | Buck-Boost | Buck-Boost |
| Type | Inductive,Linear | Inductive,Linear |
| Vin(Max), V | 5.5 | 5.5 |
| Vin(Min), V | 2.7 | 2.7 |
| Vout(Max), V | 4.7 | 4.7 |
| Vout(Min), V | 1.5 | 1.5 |
| Vref, V | 1.24 | 1.24 |
生态计划
| LM3435SQ/NOPB | LM3435SQX/NOPB | |
|---|---|---|
| RoHS | Compliant | Compliant |
应用须知
- AN-1656 Design Challenges of Switching LED Drivers (Rev. A)PDF, 171 Kb, 修订版: A, 档案已发布: May 3, 2013
Using a switching regulator as an LED driver requires the designer to convert a voltage regulator into acurrent regulator. Beyond the challenge of changing the feedback system to control current, the LEDsthemselves present a load characteristic that is much different than the digital devices and other loads thatrequire constant voltage. The LED WEBENCHВ® online design environment predicts and
模型线
系列: LM3435 (2)
制造商分类
- Semiconductors> Power Management> LED Driver> LED Lighting - Illumination