Datasheet Texas Instruments ADS8361IDBQR — 数据表

制造商Texas Instruments
系列ADS8361
零件号ADS8361IDBQR
Datasheet Texas Instruments ADS8361IDBQR

16位500 kSPS 2个ADC,4通道,串行输出24-SSOP -40至125

数据表

Dual, 500kSPS, 16-Bit, 2+2 Channel, Simultaneous Sampling A/D Converter datasheet
PDF, 1.1 Mb, 修订版: E, 档案已发布: Aug 14, 2007
从文件中提取

价格

状态

Lifecycle StatusActive (Recommended for new designs)
Manufacture's Sample AvailabilityNo

打包

Pin24
Package TypeDBQ
Industry STD TermSSOP
JEDEC CodeR-PDSO-G
Package QTY2500
CarrierLARGE T&R
Device MarkingADS8361I
Width (mm)3.9
Length (mm)8.65
Thickness (mm)1.5
Pitch (mm).64
Max Height (mm)1.75
Mechanical Data下载

参数化

# Input Channels4
Analog Voltage AVDD(Max)5.25 V
Analog Voltage AVDD(Min)4.75 V
ArchitectureSAR
Digital Supply(Max)5.5 V
Digital Supply(Min)2.7 V
INL(Max)8 +/-LSB
Input Range(Max)5.25 V
Input TypeDifferential
Integrated FeaturesN/A
InterfaceSerial
Multi-Channel ConfigurationSimultaneous Sampling
Operating Temperature Range-40 to 125 C
Package GroupSSOP
Package Size: mm2:W x L24SSOP: 52 mm2: 6 x 8.65(SSOP) PKG
Power Consumption(Typ)150 mW
RatingCatalog
Reference ModeExt,Int
Resolution16 Bits
SINAD83 dB
SNR83 dB
Sample Rate (max)500kSPS SPS
Sample Rate(Max)0.5 MSPS
THD(Typ)-94 dB

生态计划

RoHSCompliant

设计套件和评估模块

  • Evaluation Modules & Boards: 5-6KINTERFACE
    5-6K Interface Evaluation Module
    Lifecycle Status: Active (Recommended for new designs)
  • Evaluation Modules & Boards: ADS8361EVM
    ADS8361 Evaluation Module
    Lifecycle Status: Active (Recommended for new designs)

应用须知

  • Using the ADS8361 with the MSP430 USI port
    PDF, 218 Kb, 档案已发布: Jul 17, 2006
  • Interfacing the ADS8361 to TMS470 Processors
    PDF, 95 Kb, 档案已发布: Jul 19, 2006
    This application report presents methods of interfacing the ADS8361 16-bit SAR analog-to-digital converter to the serial peripheral interface (SPI) port of TMS470 processors. The flexible clocking scheme of the TMS470 SPI port, along with its internal 16-bit shift register, provides an easy hardware/software interface to this high-speed simultaneous sampling SAR converter for a variety of motor co
  • Interfacing the ADS8361 to the TMS320C6711 DSP
    PDF, 51 Kb, 档案已发布: Feb 4, 2003
    This application report presents a method for interfacing the ADS8361 16-bit SAR analog-to-digital converter to the TMS320C6711 DSP using McBSP1. The software developed reads 1024 samples continuously from the ADS8361. In an effort to reduce development time, the source code for this application note can be found on the Texas Instruments web site at http://www.ti.com. Search for document number
  • Interfacing the ADS8361 to the TMS320VC5416 DSP
    PDF, 59 Kb, 档案已发布: Dec 5, 2002
    This application note presents a method for interfacing the ADS8361 16-bit SAR analog-to-digital converter to the TMS320VC5416в„ў DSP using McBSP1. The software developed reads 1024 samples continuously from the ADS8361. In an effort to reduce development time, the source code for this application note can be found on the Texas Instruments web site at http://www.ti.com. Search for document
  • Interfacing the ADS8361 to the TMS320F2812 DSP
    PDF, 111 Kb, 档案已发布: Feb 10, 2003
    This application note presents several methods for interfacing the ADS8361 16-bit SAR analog-to-digital converter to the TMS320F2812DSP. The software developed for this application note uses both the McBSP and SPI port to highlight the flexible digital interface of the ADS8361. In an effort to reduce development time, the source code for this application note can be found on the Texas Instrument
  • Using a SAR A/D Converter for Current Measurement in Motor Control Applications (Rev. A)
    PDF, 405 Kb, 修订版: A, 档案已发布: May 18, 2015
  • Determining Minimum Acquisition Times for SAR ADCs, part 1 (Rev. A)
    PDF, 227 Kb, 修订版: A, 档案已发布: Nov 10, 2010
    This application report analyzes a simple method for calculating minimum acquisition times for successive-approximation register analog-to-digital converters (SAR ADCs). The input structure of the ADC is examined along with the driving circuit. The voltage on the sampling capacitor is then determined for the case when a step function is applied to the input of the driving circuit. Three different
  • Determining Minimum Acquisition Times for SAR ADCs, part 2
    PDF, 215 Kb, 档案已发布: Mar 17, 2011
    The input structure circuit of a successive-approximation register analog-to-digital converter (SAR ADC) incombination with the driving circuit forms a transfer function that can be used to determine minimum acquisition times for different types of applied input signals. This application report, which builds on Determining Minimum Acquisition Times for SAR ADCs When a Step Function is Applied to

模型线

制造商分类

  • Semiconductors > Data Converters > Analog-to-Digital Converters (ADCs) > Precision ADCs (<=10MSPS)