Datasheet Texas Instruments OPA541SM-BI — 数据表

制造商Texas Instruments
系列OPA541
零件号OPA541SM-BI
Datasheet Texas Instruments OPA541SM-BI

大功率单片运算放大器8-TO-3

数据表

OPA541 High Power Monolithic Operational Amplifier datasheet
PDF, 409 Kb, 修订版: B, 档案已发布: Apr 7, 2015
从文件中提取

价格

状态

Lifecycle StatusObsolete (Manufacturer has discontinued the production of the device)
Manufacture's Sample AvailabilityNo

打包

Pin8
Package TypeLMF
Industry STD TermTO-CAN
JEDEC CodeO-MBCY-W
Width (mm)25.4
Length (mm)38.86
Thickness (mm)7.11
Pitch (mm)6.35
Max Height (mm)7.62
Mechanical Data下载

替代品

ReplacementOPA541SM
Replacement CodeS

参数化

Additional FeaturesAdj Current Limit
Approx. Price (US$)12.60 | 1ku
ArchitectureFET
CMRR(Min)(dB)95
CMRR(Typ)(dB)113
GBW(Typ)(MHz)2
Input Bias Current(Max)(pA)50
Iq per channel(Max)(mA)25
Iq per channel(Typ)(mA)20
Number of Channels(#)1
Offset Drift(Typ)(uV/C)15
Operating Temperature Range(C)-25 to 85
Output Current(Typ)(mA)10000
Package GroupTO-220
WAFERSALE
Package Size: mm2:W x L (PKG)See datasheet (TO-220)
Rail-to-RailNo
RatingCatalog
Slew Rate(Typ)(V/us)10
Total Supply Voltage(Max)(+5V=5, +/-5V=10)70
Total Supply Voltage(Min)(+5V=5, +/-5V=10)20
Vos (Offset Voltage @ 25C)(Max)(mV)1

生态计划

RoHSNot Compliant
Pb FreeNo

设计套件和评估模块

  • Evaluation Modules & Boards: OPAMPEVM
    Universal Operational Amplifier Evaluation Module
    Lifecycle Status: Active (Recommended for new designs)

应用须知

  • Power Amplifier Stress and Power Handling Limitations
    PDF, 55 Kb, 档案已发布: Sep 27, 2000
    To achieve reliable power amplifier designs you must consider the stress on the amplifier compared to its power handling limitations. Power handling limits are specified by the Safe Operating Area (SOA) curves of the power amp. Stress on the amplifier depends on amplifier load and signal conditions which can be evaluated with straightforward techniques.
  • Improve OPA541 Current-Limit Stability
    PDF, 31 Kb, 档案已发布: Oct 2, 2000
    OPA541 is the industry's highest performance monolithic power amplifier. It can operate on В±40V power supplies and put out 5A continuously (10A peak). Internal current-limit circuitry can be user-programmed with a single external resistor to protect the amplifier and load from fault conditions.
  • MTTF, Failrate, Reliability, and Life Testing
    PDF, 51 Kb, 档案已发布: Oct 4, 2000
    At Burr-Brown, we characterize and qualify the reliability of our devices through high temperature life testing. The results of this testing are quantified with such values as MTTF and failure rate. This information can be very valuable when used for comparative purposes or applied to reliablility calculations. However, this information loses its worth if it is not precisely understood and appropr
  • Mounting Considerations for TO-3 Packages
    PDF, 73 Kb, 档案已发布: Sep 27, 2000
    Proper mounting of TO-3 packages is required to assure rated performance and reliability. Although the procedures are simple, ignoring them can result in poor performance and catastrophic failure of the device.

模型线

制造商分类

  • Semiconductors > Amplifiers > Operational Amplifiers (Op Amps) > Power Op Amps

其他名称:

OPA541SMBI, OPA541SM BI