Datasheet Texas Instruments OPA846IDG4 — 数据表

制造商Texas Instruments
系列OPA846
零件号OPA846IDG4
Datasheet Texas Instruments OPA846IDG4

宽带,低噪声,电压反馈运算放大器8-SOIC -40至85

数据表

Wideband, Low Noise, Voltage-Feedback Operational Amplifier datasheet
PDF, 860 Kb, 修订版: E, 档案已发布: Dec 30, 2008
从文件中提取

价格

状态

Lifecycle StatusActive (Recommended for new designs)
Manufacture's Sample AvailabilityYes

打包

Pin88
Package TypeDD
Industry STD TermSOICSOIC
JEDEC CodeR-PDSO-GR-PDSO-G
Package QTY7575
CarrierTUBETUBE
Device Marking846OPA
Width (mm)3.913.91
Length (mm)4.94.9
Thickness (mm)1.581.58
Pitch (mm)1.271.27
Max Height (mm)1.751.75
Mechanical Data下载下载

参数化

2nd Harmonic76 dBc
3rd Harmonic109 dBc
@ MHz5
Acl, min spec gain7 V/V
Additional FeaturesDecompensated
ArchitectureBipolar,Voltage FB
BW @ Acl500 MHz
CMRR(Min)95 dB
CMRR(Typ)110 dB
GBW(Typ)1750 MHz
Input Bias Current(Max)19000000 pA
Iq per channel(Max)12.9 mA
Iq per channel(Typ)12.6 mA
Number of Channels1
Offset Drift(Typ)1.5 uV/C
Operating Temperature Range-40 to 85 C
Output Current(Typ)80 mA
Package GroupSOIC
Package Size: mm2:W x L8SOIC: 29 mm2: 6 x 4.9(SOIC) PKG
Rail-to-RailNo
RatingCatalog
Slew Rate(Typ)625 V/us
Total Supply Voltage(Max)12 +5V=5, +/-5V=10
Total Supply Voltage(Min)10 +5V=5, +/-5V=10
Vn at 1kHz(Typ)1.2 nV/rtHz
Vn at Flatband(Typ)1.2 nV/rtHz
Vos (Offset Voltage @ 25C)(Max)0.6 mV

生态计划

RoHSCompliant

设计套件和评估模块

  • Evaluation Modules & Boards: DEM-OPA-SOT-1B
    DEM-OPA-SOT-1B
    Lifecycle Status: Active (Recommended for new designs)
  • Evaluation Modules & Boards: DEM-OPA-ADS-SO-1A
    DEM-OPA-ADS-SO-1A
    Lifecycle Status: Preview (Device has been announced but is not in production. Samples may or may not be available)
  • Evaluation Modules & Boards: DEM-OPA-SO-1B
    DEM-OPA-SO-1B
    Lifecycle Status: Active (Recommended for new designs)

应用须知

  • Transimpedance Considerations for High-Speed Operational Amplifiers
    PDF, 193 Kb, 档案已发布: Nov 22, 2009
    Designing high-resolution detection circuits using photodiodes presents considerable challenges because bandwidth, gain, and input-referred noise are coupled together. This application note reviews the basic issues of transimpedance design, provides a set of detailed design equations, explains those equations, and develops an approach to easily compare potential solutions.
  • Using a decompensated op amp for improved performance
    PDF, 352 Kb, 档案已发布: Mar 11, 2005
  • ADS5500, OPA695: PC Board Layout for Low Distortion High-Speed ADC Drivers
    PDF, 273 Kb, 档案已发布: Apr 22, 2004
    Once an analog-to-digital converter (ADC) and a driver/interface have been selected for a given application, the next step to achieving excellent performance is laying out the printed circuit board (PCB) that will support the application. This application report describes several techniques for optimizing a high-speed, 14-bit performance, differential driver PCB layout using a wideband operation
  • Measuring Board Parasitics in High-Speed Analog Design
    PDF, 134 Kb, 档案已发布: Jul 7, 2003
    Successful circuit designs using high-speed amplifiers can depend upon understanding and identifying parasitic PCB components. Simulating a design while including PCB parasitics can protect against unpleasant production surprises. This application report discusses an easy method for measuring parasitic components in a prototype or final PC board design by using a standard oscilloscope and low freq
  • Noise Analysis for High Speed Op Amps (Rev. A)
    PDF, 256 Kb, 修订版: A, 档案已发布: Jan 17, 2005
    As system bandwidths have increased an accurate estimate of the noise contribution for each element in the signal channel has become increasingly important. Many designers are not however particularly comfortable with the calculations required to predict the total noise for an op amp or in the conversions between the different descriptions of noise. Considerable inconsistency between manufactu

模型线

制造商分类

  • Semiconductors > Amplifiers > Operational Amplifiers (Op Amps) > High-Speed Op Amps (>=50MHz)