Datasheet Texas Instruments LM83CIMQA/NOPB — 数据表

LM83 LM83 Triple-Diode Input and Local Digital Temperature Sensor with Two-Wire
Interface Literature Number: SNIS111A LM83
Triple-Diode Input and Local Digital Temperature Sensor
with Two-Wire Interface
General Description
The LM83 is a digital temperature sensor with a 2 wire serial
interface that senses the voltage and thus the temperature of
three remote diodes using a Delta-Sigma analog-to-digital
converter with a digital over-temperature detector. The LM83
accurately senses its own temperature as well as the temperature of three external devices, such as Pentium II В® Processors or diode connected 2N3904s. The temperature of
any ASIC can be detected using the LM83 as long as a dedicated diode (semiconductor junction) is available on the die.
Using the SMBus interface a host can access the LM83’s
registers at any time. Activation of a T_CRIT_A output occurs when any temperature is greater than a programmable
comparator limit, T_CRIT. Activation of an INT output occurs
when any temperature is greater than its corresponding programmable comparator HIGH limit.
The host can program as well as read back the state of the
T_CRIT register and the four T_HIGH registers. Three state
logic inputs allow two pins (ADD0, ADD1) to select up to 9
SMBus address locations for the LM83. The sensor powers
up with default thresholds of 127ЛљC for T_CRIT and all
T_HIGHs. The LM83 is pin for pin and register compatible
with the LM84 as well as the Maxim MAX1617 and the Analog Devices ADM1021. Features
n Accurately senses die temperature of 3 remote ICs, or …