Datasheet Texas Instruments LMH6624MF — 数据表
| 制造商 | Texas Instruments |
| 系列 | LMH6624 |
| 零件号 | LMH6624MF |
单/双超低噪声宽带运算放大器5-SOT-23 -40至125
数据表
LMH6624 and LMH6626 Single/Dual Ultra Low Noise Wideband Operational Amplifier datasheet
PDF, 1.9 Mb, 修订版: G, 档案已发布: Dec 19, 2014
从文件中提取
价格
状态
| Lifecycle Status | NRND (Not recommended for new designs) |
| Manufacture's Sample Availability | No |
打包
| Pin | 5 |
| Package Type | DBV |
| Industry STD Term | SOT-23 |
| JEDEC Code | R-PDSO-G |
| Package QTY | 1000 |
| Carrier | LARGE T&R |
| Device Marking | A94A |
| Width (mm) | 1.6 |
| Length (mm) | 2.9 |
| Thickness (mm) | 1.2 |
| Pitch (mm) | .95 |
| Max Height (mm) | 1.45 |
| Mechanical Data | 下载 |
替代品
| Replacement | LMH6624MF/NOPB |
| Replacement Code | S |
参数化
| Additional Features | Decompensated |
| Architecture | Bipolar |
| CMRR(Min) | 87 dB |
| CMRR(Typ) | 95 dB |
| GBW(Typ) | 1800 MHz |
| Input Bias Current(Max) | 20000000 pA |
| Iq per channel(Max) | 16 mA |
| Iq per channel(Typ) | 12 mA |
| Number of Channels | 1 |
| Offset Drift(Typ) | 0.25 uV/C |
| Operating Temperature Range | -40 to 125 C |
| Output Current(Typ) | 100 mA |
| Package Group | SOT-23 |
| Package Size: mm2:W x L | 5SOT-23: 8 mm2: 2.8 x 2.9(SOT-23) PKG |
| Rail-to-Rail | No |
| Rating | Catalog |
| Slew Rate(Typ) | 400 V/us |
| Total Supply Voltage(Max) | 12 +5V=5, +/-5V=10 |
| Total Supply Voltage(Min) | 5 +5V=5, +/-5V=10 |
| Vn at 1kHz(Typ) | 0.92 nV/rtHz |
| Vos (Offset Voltage @ 25C)(Max) | 0.5 mV |
生态计划
| RoHS | See ti.com |
设计套件和评估模块
- Evaluation Modules & Boards: LMH730227
Evaluation Board for High-Speed Single Op Amp in the 8-Pin SOIC Package
Lifecycle Status: Active (Recommended for new designs) - Evaluation Modules & Boards: LMH730316
LMH730316 Evaluation Board for High-Speed Single Op Amp in the 5-/6-Pin SOT-23 Package
Lifecycle Status: Active (Recommended for new designs) - Evaluation Modules & Boards: LMH730216
Evaluation Board for High-Speed Single Op Amp in the 5- 6-Pin SOT-23 Package
Lifecycle Status: Active (Recommended for new designs)
应用须知
- OA-15 Frequent Faux Pas in Applying Wideband Current Feedback Amplifiers (Rev. C)PDF, 365 Kb, 修订版: C, 档案已发布: Apr 17, 2013
As op amp operating speeds have moved to ever higher frequencies, a whole new set of design concernshave come into play for linear op amp applications. With the development of the current feedbacktopology, design concerns unique to that topology must also be considered if optimal performance is to beachieved from devices offering over 200 MHz в€’3 dB bandwidths. This application report reviews - AN-1604 Decompensated Operational Amplifiers (Rev. B)PDF, 206 Kb, 修订版: B, 档案已发布: May 1, 2013
This application report discusses the what, why, and where of decompensated op amps. This applicationreport also describes external compensation techniques, such as reducing loop gain, to stabilize op ampsoperated at gains less than the minimum stable gain specified in the datasheet. A comprehensivetreatment of input lead-lag compensation including examples is presented. - OA-14 Improving Amplifier Noise for High 3rd Intercept Amplifiers (Rev. F)PDF, 594 Kb, 修订版: F, 档案已发布: May 1, 2013
This application report discusses improving Amplifier Noise for High 3rd Intercept Amplifiers. - Transimpedance Amplifiers (TIA): Choosing the Best Amplifier for the job (Rev. A)PDF, 153 Kb, 修订版: A, 档案已发布: May 16, 2017
This application note is intended as a guide for the designer looking to amplify the small signal from a photodiode or avalanche diode so that it would be large enough for further processing (e.g. data acquisition) or to trigger some other event in a system. The challenge in doing so, as always, is to not degrade the signal such that it becomes indistinguishable from random noi
模型线
系列: LMH6624 (6)
制造商分类
- Semiconductors > Amplifiers > Operational Amplifiers (Op Amps) > Precision Op Amps