Datasheet Texas Instruments THS4141IDGKRG4 — 数据表

制造商Texas Instruments
系列THS4141
零件号THS4141IDGKRG4
Datasheet Texas Instruments THS4141IDGKRG4

全差分输入/输出高斜率放大器8-VSSOP -40至85

数据表

High-Speed Fully Differential I/O Amplifiers datasheet
PDF, 1.2 Mb, 修订版: F, 档案已发布: Jan 31, 2006
从文件中提取

价格

状态

Lifecycle StatusObsolete (Manufacturer has discontinued the production of the device)
Manufacture's Sample AvailabilityNo

打包

Pin8
Package TypeDGK
Industry STD TermVSSOP
JEDEC CodeR-PDSO-G
Width (mm)3
Length (mm)3
Thickness (mm).97
Pitch (mm).65
Max Height (mm)1.07
Mechanical Data下载

参数化

2nd Harmonic(dBc)83
3rd Harmonic(dBc)80
@ MHz1
Acl, min spec gain(V/V)1
Additional FeaturesN/A
Approx. Price (US$)6.77 | 100u
ArchitectureFully Differential
Voltage FB
BW @ Acl(MHz)160
CMRR(Min)(dB)75
CMRR(Typ)(dB)84
GBW(Typ)(MHz)170
Input Bias Current(Max)(pA)15000000
Iq per channel(Max)(mA)16
Iq per channel(Typ)(mA)13.2
Number of Channels(#)1
Offset Drift(Typ)(uV/C)7
Operating Temperature Range(C)-40 to 85
0 to 70
Output Current(Typ)(mA)85
Package GroupVSSOP
Package Size: mm2:W x L (PKG)8VSSOP: 15 mm2: 4.9 x 3(VSSOP)
Rail-to-RailNo
RatingCatalog
Slew Rate(Typ)(V/us)450
Total Supply Voltage(Max)(+5V=5, +/-5V=10)33
Total Supply Voltage(Min)(+5V=5, +/-5V=10)4
Vn at Flatband(Typ)(nV/rtHz)6.5
Vos (Offset Voltage @ 25C)(Max)(mV)7

生态计划

RoHSNot Compliant
Pb FreeNo

设计套件和评估模块

  • Evaluation Modules & Boards: THS4140EVM
    THS4140EVM Evaluation Module
    Lifecycle Status: Active (Recommended for new designs)

应用须知

  • Fully-Differential Amplifiers (Rev. E)
    PDF, 867 Kb, 修订版: E, 档案已发布: Sep 19, 2016
    Differential signaling has been commonly used in audio, data transmission, and telephone systems for many years because of its inherent resistance to external noise sources. Today, differential signaling is becoming popular in high-speed data acquisition, where the ADC’s inputs are differential and a differential amplifier is needed to properly drive them.Two other advantages of di
  • Noise Analysis for High Speed Op Amps (Rev. A)
    PDF, 256 Kb, 修订版: A, 档案已发布: Jan 17, 2005
    As system bandwidths have increased an accurate estimate of the noise contribution for each element in the signal channel has become increasingly important. Many designers are not however particularly comfortable with the calculations required to predict the total noise for an op amp or in the conversions between the different descriptions of noise. Considerable inconsistency between manufactu

模型线

制造商分类

  • Semiconductors > Amplifiers > Operational Amplifiers (Op Amps) > High-Speed Op Amps (>=50MHz)