Datasheet Texas Instruments TLV341IDBVR — 数据表

制造商Texas Instruments
系列TLV341
零件号TLV341IDBVR
Datasheet Texas Instruments TLV341IDBVR

具有6-SOT-23关断功能的低压轨至轨输出CMOS运算放大器-40至125

数据表

TLV34xx Low-Voltage Rail-to-Rail Output CMOS Operational Amplifiers With Shutdown datasheet
PDF, 2.1 Mb, 修订版: D, 档案已发布: Apr 29, 2016
从文件中提取

价格

状态

Lifecycle StatusActive (Recommended for new designs)
Manufacture's Sample AvailabilityYes

打包

Pin6
Package TypeDBV
Industry STD TermSOT-23
JEDEC CodeR-PDSO-G
Package QTY3000
CarrierLARGE T&R
Device MarkingYC9E
Width (mm)1.6
Length (mm)2.9
Thickness (mm)1.2
Pitch (mm).95
Max Height (mm)1.45
Mechanical Data下载

参数化

Additional FeaturesShutdown
ArchitectureCMOS
CMRR(Min)75 dB
CMRR(Typ)90 dB
GBW(Typ)2.2 MHz
Input Bias Current(Max)200 pA
Iq per channel(Max)0.15 mA
Iq per channel(Typ)0.07 mA
Number of Channels1
Offset Drift(Typ)1.9 uV/C
Operating Temperature Range-40 to 125 C
Output Current(Typ)113 mA
Package GroupSOT-23
Package Size: mm2:W x L6SOT-23: 8 mm2: 2.8 x 2.9(SOT-23) PKG
Rail-to-RailOut
RatingCatalog
Slew Rate(Typ)0.9 V/us
Total Supply Voltage(Max)5.5 +5V=5, +/-5V=10
Total Supply Voltage(Min)1.5 +5V=5, +/-5V=10
Vn at 1kHz(Typ)33 nV/rtHz
Vos (Offset Voltage @ 25C)(Max)4 mV

生态计划

RoHSCompliant

设计套件和评估模块

  • Evaluation Modules & Boards: DIP-ADAPTER-EVM
    DIP Adapter Evaluation Module
    Lifecycle Status: Active (Recommended for new designs)

应用须知

  • Conditioning a Switch-mode Power Supply Current Signal Using TI Op Amps
    PDF, 61 Kb, 档案已发布: Mar 23, 2000
    The switch-mode power supply primary current is often sensed using a power resistor. Using an op amp to amplify the current-sense signal can reduce cost and improve noise performance and efficiency. This report reviews the advantages of using an op amp circuit and analyzes the design criteria needed to choose the proper op amp.
  • Use of Rail-to-Rail Operational Amplifiers (Rev. A)
    PDF, 159 Kb, 修订版: A, 档案已发布: Dec 22, 1999
    This application report assists design engineers to understand the functionality and benefits of rail-to-rail operational amplifiers. It shows simplified schematics, functions, and characteristics of the input and output stages. Typical application schematics for rail-to-rail operational amplifiers are also discussed.

模型线

制造商分类

  • Semiconductors > Amplifiers > Operational Amplifiers (Op Amps) > General-Purpose Op Amps