Datasheet Texas Instruments OPA2541BM — 数据表

制造商Texas Instruments
系列OPA2541
零件号OPA2541BM
Datasheet Texas Instruments OPA2541BM

双路大功率运算放大器8-TO-3 -55至125

数据表

Dual High Power Operational Amplifier datasheet
PDF, 155 Kb, 档案已发布: Sep 27, 2000
从文件中提取

价格

状态

Lifecycle StatusActive (Recommended for new designs)
Manufacture's Sample AvailabilityNo

打包

Pin8
Package TypeLMF
Industry STD TermTO-CAN
JEDEC CodeO-MBCY-W
Package QTY18
CarrierTUBE
Device MarkingOPA2541BM
Width (mm)25.4
Length (mm)38.86
Thickness (mm)7.11
Pitch (mm)6.35
Max Height (mm)7.62
Mechanical Data下载

参数化

Additional FeaturesN/A
ArchitectureFET
CMRR(Min)95 dB
CMRR(Typ)106 dB
GBW(Typ)1.6 MHz
Input Bias Current(Max)50 pA
Iq per channel(Max)25 mA
Iq per channel(Typ)20 mA
Number of Channels2
Offset Drift(Typ)15 uV/C
Operating Temperature Range-40 to 125,-55 to 125 C
Output Current(Typ)7000 mA
Package GroupTO-3
Package Size: mm2:W x L8TO-3: 974 mm2: 25.4 x 38.35(TO-3) PKG
Rail-to-RailNo
RatingCatalog
Slew Rate(Typ)8 V/us
Total Supply Voltage(Max)80 +5V=5, +/-5V=10
Total Supply Voltage(Min)20 +5V=5, +/-5V=10
Vos (Offset Voltage @ 25C)(Max)1 mV

生态计划

RoHSCompliant
Pb FreeYes

应用须知

  • Mounting Considerations for TO-3 Packages
    PDF, 73 Kb, 档案已发布: Sep 27, 2000
    Proper mounting of TO-3 packages is required to assure rated performance and reliability. Although the procedures are simple, ignoring them can result in poor performance and catastrophic failure of the device.
  • Power Amplifier Stress and Power Handling Limitations
    PDF, 55 Kb, 档案已发布: Sep 27, 2000
    To achieve reliable power amplifier designs you must consider the stress on the amplifier compared to its power handling limitations. Power handling limits are specified by the Safe Operating Area (SOA) curves of the power amp. Stress on the amplifier depends on amplifier load and signal conditions which can be evaluated with straightforward techniques.
  • Tuning in Amplifiers
    PDF, 44 Kb, 档案已发布: Oct 2, 2000
    Have you ever had the experience of designing an analog gain block with an amplifier that is specified to be unity gain stable only to find that it is oscillating out of control in your circuit? Or have you ever replaced a stable voltage feedback amplifier with a current feedback amplifier to find that the current feedback amplifier immediately oscillates when placed in the amplifier socket? Oscil
  • Single-Supply Operation of Operational Amplifiers
    PDF, 77 Kb, 档案已发布: Oct 2, 2000
    Operation of op amps from single supply voltages is useful when negative supply voltages are not available. Furthermore, certain applications using high voltage and high current op amps can derive important benefits from single supply operation.
  • Op Amp Performance Analysis
    PDF, 76 Kb, 档案已发布: Oct 2, 2000
    This bulletin reflects the analysis power gained through knowledge of an op amp circuit's feedback factor. Feedback dictates the performance of an op amp both in function and in quality. The major specifications of the amplifier descibe an open-loop device awaiting feedback direction of the end circuit's function. Just how well the amplifier performs the function reflects through the feedback inte

模型线

制造商分类

  • Semiconductors > Amplifiers > Operational Amplifiers (Op Amps) > Power Op Amps